Jim...
We're going to start charging you for all this networking help <g> Got a PO
handy <LOL>
Just kidding, of course...
The routers, hopefully, are configured correctly, either by your network
provider or by you. Second, you need to specify the Router's IP address on
each end, as a GATEWAY in NMMGR. On your machine in Ohio, specify 192.x.x.1
(or the router's real IP address) as a Gateway. The same on the other end,
but with ITS router gateway...
Lastly, Under NMMGR, specify known networks - Ohio's machine should have the
IP address space of the other end specified, and the other end should have
Ohio's specified.
Hope this helps
Joe
----------------------------------------------------------------------------
Joe Geiser - CSI Business Solutions, LLC
140 Bristol-Oxford Valley Road, Suite 102
Langhorne, PA 19047-3083, USA
Phone: (215) 945-8100 Fax: (215) 943-8408
[log in to unmask] http://www.csillc.com
----------------------------------------------------------------------------
-----Original Message-----
From: Jim Phillips <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Monday, August 04, 1997 9:31 AM
Subject: Networking, Again
>Okay, we have a 918 connected to a router going to our frame relay
>network that we are going to run NetBase to a computer in Texas. I'd
>like to get NetBase running between our old computer (948) and the new
>here in Ohio first. The two computers are on the same network (physical
>connection), but have different IP addresses. The 918 is 010.x.x.x
>(assigned by our frame relay provider) and the 948 is 192.x.x.x.
>Obviously, I can't ping the 918 from the 948 (unknown node), so what's
>the procedure to configure these two machines so they can talk to each
>other?
>
>Gee, that's two on-topic posts for me today!
>
>Jim Phillips Manager of Information Systems
>E-Mail: [log in to unmask] Therm-O-Link, Inc.
>Phone: (330) 527-2124 P. O. Box 285
> Fax: (330) 527-2123 Garrettsville, Ohio 44231
>
|