Mike asked......
> And now another question:
>
> I replaced the HP-IB i/f card with an RS232 serial card. The printer
> comes up fine, but I need to lower the baud rate from 19.2 to 9.6.
> Manuals are a thing of the past for the RS232 card. Would someone
provide
> me with the config setting I have to change and what to change it to?
On all of our 256x printers, config register 22 is set to a value of 61
for 19.2k.
9600 baud value should be a value of 51.
I would first run a test print just in case......
/alan