connect modem with terminal: USE HYPERTERMINAL OR REFLECTIONS
type this
AT&F
ATE1
ATM1
ATQ0
ATV1
ATX1
AT&B0
AT&C1
AT&D2
AT&H0
AT&I0
AT&K0
AT&M0
AT&R1
AT&S0=1
ATW???? CHECK MANUAL TO SAVE CONFIG TO MODEM
NMMGR/3000 (B.06.00) #23 Terminal Profile Data:
Y
Fill in the required information; then press the Save Data key.
Command:
PATH: DTS.PROFILE.MD16U192
Terminal type [10] (10, 18, or 24)
or terminal type file name [ ]
Line speed [19200] (300, 1200, 2400, 4800, 9600, 19200, or 38400
bps)
Record width [80 ] (1... 2048 bytes)
Modem type [1] (0 - none, 1 - US, 2 - European)
Modem behavior [1] (0 - none, 1 - DCE, 2 - DTE, 3 - DCE high)
Parity [NONE] (None, Even, Odd, 0's, or 1's)
Speed/Parity Sensing? [Y] (Y/N) Allow :HELLO logon? [Y] (Y,N)
Reset HP terminal? [N] (Y/N) NLIO device? [N] (Y,N)
Hardware handshaking [N] (Y/N)
If configuring device classes, enter names below. If additional names are
required, press Go To CLASSES, otherwise press Prior Screen.
Device class [MODEM ] [ ] [ ] [ ]
names [ ] [ ] [ ] [ ]
File: NMCONFIG.PUB.SYS
Worked for me !!!!!!!!!!
David Hutchinson
GGT
24 Industrial Park Road West
Tolland, CT 06084
860-871-3841
|