Hi Scott,

I have been using DTC Manager on the 3000 for a longggg time and I'v
alway been under the impression (mistaken?)  that you have to use the
openview and dtc mgr for windows 3.1 (and 95/NT if I ever get the
software)  version to control DTC's on the 3000. I have Openview on a
unix box and whenever I have asked when dtc mgr for the 3000 will be
supported the answer has always been, take a DEEP breath. If I'm
wrong someone from HP give me a product No.!

John "Blue eyes, blue lips, blue face" Skelton

> I'm new to the 3000 and am trying to configure a DTC 16RX to enable terminal
> access.  The DTC has been configured using the DTC Manager software loaded on
> one of our 9000s.  Using a terminal connected to the DTC, I can connect to
> every system with the exception of our 3000 (928LX w/ MPE/iX 5.0).  The message
> "Connection Refused" is the result.  The DTC has been configured in NMMGR, and
> LDEVs assigned to its ports.  The DTC validation runs with no errors, as well.
> After the network configuration file is saved and the system restarted, the DTC
> does not appear in the list of configured DTCs in the system diagnostics, but
> is still present in the NMMGR configuration file.  The HP documentation seems
> to indicate that the DTC's MAC address and its IP address do not need to be
> included in the NMMGR configuration file, since the config info is being
> supplied by the 9000.  I've tried it both ways without any success.  Any
> assistance on this (hopefully) simple problem would be greatly appreciated.
>
> Thanks!
> Scott Stewart
>
>