Subject: | |
From: | |
Reply To: | |
Date: | Thu, 12 Dec 1996 12:46:23 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello Sam,
This is VTERR 42, most common causes:
1. Remote PC has powered down or re-booted instead of shutting down
the VT & TCP software.
2. This error is also commonly seen when (2) PC's have the same IP
address configured. These (2) PC's will not be able to operate
at the same time with a duplication IP address, so the last one
which has booted up and started the TCP software will be the
one working, until the other PC experiencing the problem reboots
and then they are the working system. Each PC must have a unique
IP address.
Hope this helps.
Regards,
James Hofmeister
Hewlett Packard
Worldwide Technology Network Expert Center
P.S. My Ideals are my own, not necessarily my employers.
Sam Knight ([log in to unmask]) wrote:
: We have been having several of our user sessions disconnected with the
: following error message:
: ** NS/3000 NetIPC ERROR IN VT; Job: #S7839; PIN: 79; Info: 1
: - Error: 42; REMOTE NOT RESPONDING, CONNECTION CLOSED
: We are using Business Session with Windows 3.1 and Windows 95 networked to
: an HP3000-957 MPE/iX 4.0 and have not been able to determine the exact
: cause of the error. We have different brands of PCs and a mix of the
: Windows operating systems on them. I haven't been able to find any one
: thing that is consistent on the PCs that have the errors.
: Has anyone else experienced this problem? Did you find a solution? Do you
: have any suggestions as to what to look for?
: Any and All Help would be appreciated.
: Sam....
: [log in to unmask]
: Jacksonville University
: Jacksonville, FL
|
|
|