In article <[log in to unmask]>, Brad Harrison <[log in to unmask]> says:
>
>Hello,
>
>I'm trying to connect an HP3000 (MPE/iX V5) to a PC Ethernet Network.
>I'm not familiar with the HP3000 and used the
>'Network Planning and Configuration Guide' to guide me through the
>NMMGR screens.
>
>Here's what works:
>
>* We've run NMMGR to setup the network interface. We used the existing DTC
link.
>* We've run the Validation steps under NMMGR (no errors).
>* We've entered NETCONTROL START;NET=xxxx and no errors were displayed.
>* From PC's on the network, we can PING the HP3000 (we know cables, hubs and
PC setup
>  is correct).
>
>The problems:
>
>* When we try to open a VT-MGR session with Reflections, we are getting the
message
>  that the 'Host refused the connection'.
>
>* When we enter NSCONTROL START the following error is displayed:
>   MISSING DADCONF.NET.SYS CONFIGURATION FILE (DSERR 661)
>   NETCONTROL COMMAND ERROR (CIERR 5400)
>  We have looked up this error but don't know how to resolve.
>
>Could someone please suggest what I should look at next?  Please remember that
I do not
>have an HP3000 background. Thanks!!!
 
Try :STREAMing JCONFJOB.NET.SYS.  This should create the "DADCONF"
file for you. Then try :NSCONTROL START=VTA, and if there's no version
mismatch, you should be in business.
 
Winston K.