Subject: | |
From: | |
Reply To: | |
Date: | Thu, 23 Feb 1995 15:47:03 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
joseph whitlock ([log in to unmask]) wrote:
: In article <[log in to unmask]>, [log in to unmask]
(Doug) says:
: >
: >the site command is not implemented on the Hp3000 (per the response
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
: The site command is not implemented on the version we use MPEix 4.0,
^^^^^^^^^^^^^^^^^^
Well, I'll have to disagree. To make sure my memory is not failing,
I just tried a site command on our 4.0 and 5.0 systems and YES, site
command is implemented on both 4.0 and 5.0... see 4.0 example below:
(eero@hpcsyn10:~):ftp lax
Connected to lax.cup.hp.com.
220 HP ARPA FTP Server [A0004K25] (C) Hewlett-Packard Co. 1990
Name (lax:eero): manager.sys
230 User logged on
Remote system type is MPE/iX.
ftp> site stream jftpstrt.arpa
550 USER PASSWORD SPECIFIED BUT NOT REQUIRED; IGNORED. (CIWARN 1477)
ftp>
...and the system console showed:
7:37/#J291/46/LOGON FOR: "FTPMON,FTP.SYS,ARPA" ON LDEV #10.
Could it be that some of you folks is running some other than HP's FTP
for the 3000? The banner should tell it. As you can see from this
example, it was HP's FTP and version as shown above (4.0 version).
:-) Eero Laurila - HP CSY Networking lab.
|
|
|