Both were 918 or 928’s. I will find them and introduce you.
-Craig
Sent from Yahoo Mail for iPad
On Saturday, February 4, 2023, 7:29 am, Tracy Johnson <[log in to unmask]> wrote:
Does it do F/W?
This is an older 957. Won't do the newer SCSI.
On 2/4/23 10:25, Craig Lalley wrote:
> There is a product, SCSI2SD, I know a couple of people who have it
> working.
>
> -Craig
>
>
> Sent from Yahoo Mail for iPad <https://overview.mail.yahoo.com/?.src=iOS>
>
> On Saturday, February 4, 2023, 7:08 am, Tracy Johnson
> <[log in to unmask]> wrote:
>
> What Lalley said.
>
> I lost a mirror myself two days ago. Now I gotta find the same
> make and
> model and have it inserted into a Jamaica drive. (I upgraded my
> Jamaica
> mechs to 32MB years ago, but when mirroring you need the same
> geometry.)
>
> It's either that or find another array ... hmmm ... maybe
> Beechglen has
> a used one?
>
> Even SSD, now THAT would make a fast Empire game!
>
>
> On 2/4/23 09:57, Craig Lalley wrote:
> > FSCHECK.MPEXL.TELESUP
> > ca all
> > -Craig
> >
> >
> > Sent from Yahoo Mail for iPad
> >
> >
> > On Saturday, February 4, 2023, 6:52 am, Terry
> Simpkins<[log in to unmask]> wrote:
> >
> > My little 928 had a system failure this morning. My initial
> suspicion is
> > that LDEV #2 has a problem.
> > I issued an ‘abortjob’ command from a ‘non-console’ session, and
> got these
> > messages before the command completed successfully:
> >
> >
> > Bad SYSTEM LOGICAL Sector number 0x226A80b on ldev 2
> (io_status=FFD40071)
> > Filename of badfile:/VESOFT/CMD22/SHOWSCH8
> > Bad SYSTEM LOGICAL Sector number 0x226A80b on ldev 2
> (io_status=FFD40071)
> > Filename of badfile:/VESOFT/CMD22/SHOWSCH8
> > Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2
> (io_status=FFD40071)
> > Filename of badfile:/VESOFT/CMD22/SHOWSCH8
> > Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2
> (io_status=FFD40071)
> > Filename of badfile:/VESOFT/CMD22/SHOWSCH8
> > Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2
> (io_status=FFD40071)
> > Filename of badfile:/VESOFT/CMD22/SHOWSCH8
> >
> > (There were more of these messages but I didn’t copy everything)
> >
> > I walked over to the other room where the console is located and
> found the
> > following displayed:
> >
> > System Abort 1740 from subsystem 107
> > Secondary Status: INFO = -44 Subsys = 113
> > System Halt 7, $06CC
> >
> > Then autorestart kicked in and the system performed a ‘Start
> NoRecovery’,
> > with no reported errors.
> > I ran “LISTF” on the file listed above (SHOWSCH8.CMD22.VESOFT)
> without a
> > problem.
> > And then “printed” the file to the screen without generating
> another system
> > halt. If the drive was failing, I thought that would create
> another system
> > failure.
> >
> > Any ideas/suggestions?
> >
> > Terry W Simpkins
> > Yorktown, VA 23693
> > IBA # 8778 SS1000, SS2000, BBG, 50CC
> >
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
> >
> >
> >
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
>
> --
> Tracy Johnson
> BT
>
>
>
>
>
>
>
> NNNN
>
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
Tracy Johnson
BT
NNNN
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|