And don't forget a DSTAT ALL.
Just to make sure LDEV 2 still there to begin with. ;^)
On 2/4/23 10:33, Terry Simpkins wrote:
> Thanks to those so quick to react (why aren't you watching Saturday morning cartoons?? 😉)
>
> FSCHECK reported only 2 little directory warnings.
> One data group is on the user volume but not the system volume, and another data group is "not active on user volume".
> Both of these are MANMAN database groups that are never used. But I'll get those 'problems' corrected.
>
> With no other errors/problems reported, I guess I'll just wait and see if another incident occurs.
>
> Terry W Simpkins
> Yorktown, VA 23693
> IBA # 8778 SS1000, SS2000, BBG, 50CC
>
> -----Original Message-----
> From: HP-3000 Systems Discussion<[log in to unmask]> On Behalf Of Craig Lalley
> Sent: Saturday, February 04, 2023 9:58 AM
> To:[log in to unmask]
> Subject: Re: [HP3000-L] System abort
>
> FSCHECK.MPEXL.TELESUP
> ca all
> -Craig
>
>
> Sent from Yahoo Mail for iPad
>
>
> On Saturday, February 4, 2023, 6:52 am, Terry Simpkins<[log in to unmask]> wrote:
>
> My little 928 had a system failure this morning. My initial suspicion is that LDEV #2 has a problem.
> I issued an ‘abortjob’ command from a ‘non-console’ session, and got these messages before the command completed successfully:
>
>
> Bad SYSTEM LOGICAL Sector number 0x226A80b on ldev 2 (io_status=FFD40071) Filename of badfile:/VESOFT/CMD22/SHOWSCH8 Bad SYSTEM LOGICAL Sector number 0x226A80b on ldev 2 (io_status=FFD40071) Filename of badfile:/VESOFT/CMD22/SHOWSCH8 Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2 (io_status=FFD40071) Filename of badfile:/VESOFT/CMD22/SHOWSCH8 Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2 (io_status=FFD40071) Filename of badfile:/VESOFT/CMD22/SHOWSCH8 Bad SYSTEM LOGICAL Sector number 0x226A80ÿ on ldev 2 (io_status=FFD40071) Filename of badfile:/VESOFT/CMD22/SHOWSCH8
>
> (There were more of these messages but I didn’t copy everything)
>
> I walked over to the other room where the console is located and found the following displayed:
>
> System Abort 1740 from subsystem 107
> Secondary Status: INFO = -44 Subsys = 113 System Halt 7, $06CC
>
> Then autorestart kicked in and the system performed a ‘Start NoRecovery’, with no reported errors.
> I ran “LISTF” on the file listed above (SHOWSCH8.CMD22.VESOFT) without a problem.
> And then “printed” the file to the screen without generating another system halt. If the drive was failing, I thought that would create another system failure.
>
> Any ideas/suggestions?
>
> Terry W Simpkins
> Yorktown, VA 23693
> IBA # 8778 SS1000, SS2000, BBG, 50CC
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
>
>
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visithttp://raven.utc.edu/archives/hp3000-l.html *
--
Tracy Johnson
BT
NNNN
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|