Grab yourself a copy of the 9X8 CE Handbook:

 http://www.3kranger.com/HP3000/mpeix/en-hard/PDF/A2051-90003.pdf

In Chapter 5 Troubleshooting, Page 5-10 it tells about the 70xx codes.
702B is memory error for memory card in slot 2, side B.

In Chapter 4 Configuration, Page 4-14/-15/... it tells and shows the slot
layout. You should then be able to identify the memory card that is failing.

You may want to just pull all and re-insert them, making sure they are 
secure.
Try the boot.

Or/And swap the 2B card for one in slot 3
(assuming it qualifies with matching memory size, Rule #2).
Then see if the error reports the same card, but now in the new slot.
Which would confirm the card is not feeling well.

HP-A3131A 128mb (2x64mb cards - since you need a matching set)
is likelty what you want/need. Its the largest memory cards for a 9x8.

Keven Miller

----- Original Message ----- 
From: "Wyell Grunwald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tue 05 Oct 2021 08:07 PM
Subject: [HP3000-L] [EXT]: System fault during self-test of HP3000 918RX


External Email

Greetings HP3000L !

I am getting the following console line with power on self-test:

FLT      702B      REMOTE:  disabled    inactive    multiple      ACCESS 
FAULT: 03

What does this mean ?

Wyell Grunwald

This message is not from a UTC.EDU address. Caution should be used in 
clicking links and downloading attachments from unknown senders or 
unexpected email.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *