All the newer A- and N-class systems have IP configurable remote console. I assume this is an older system?
In addition to the PC options, which are excellent... If you have a DTC, I used to set up back-to-back DTC switching. You configure a host (outbound) port on the DTC and you choose it by IP and TCP port ID.
Mark Ranft
Pro3K
-----Original Message-----
From: HP-3000 Systems Discussion <[log in to unmask]> On Behalf Of Johnson, Tracy
Sent: Wednesday, September 26, 2018 12:36 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Remote Console
I think you got to configure it when you're at the console with control-b to allow LDEV 21 to accept remote input.
Either for modem or network, not sure.
Been so long.
But these days we just have a PC as the console with a terminal emulator (Minisoft, Reflection, or QCTerm) with two NICs and just remote into the PC and open a window from there and do our remote reboots.
Tracy Johnson
+00 1 757 766-4318 tel
+00 1 757 755-6470 mobile
Hampton, Virginia, U.S.
[log in to unmask]
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> Behalf Of Chuck Trites
>
> The following message was sent from an external e-mail address. Be
> cautious when clicking on links, opening attachments or providing
> sensitive information.
>
> ________________________________
>
> I am looking to provide an option for rebooting an HP3000 remotely
> using LDEV 21. Is anyone doing this and if so, how are you doing it?
> Are you using a modem and land line or an IP address to get to LDEV 21?
> TIA,
> Chuck Trites
> [log in to unmask]
> Trites Consulting, Inc.
> 5 Sargents Place
> Unit 1
> Gilford, NH 03249
> Phone: (603) 219-1500
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|