The 918 supports MPE/iX 7.5 - as do all 9x8 and 9x9 machines.
9x7 machines, on the other hand, can only go as far as 6.5 I believe.
Gilles Schipper
Sent via mobile
416-702-7900
> On Oct 11, 2016, at 3:19 PM, sieler_allegro <[log in to unmask]> wrote:
>
> Alan:
>> If you have a CSLT you could try booting from an alternate path, and see if it boots it would probably confirm that its failing to find/read ldev1. I assume you meant MPE/iX 6.5 on a 918?
>
> Good idea!
>
> Also, and I'm dating myself (no, not like Peewee Herman), but...I can't recall if there's
> a PDC-level 'search' command on the 9x8 like there is on "newer" machines. If there is,
> you can try that to see if it sees the disk drive.
>
> With the CSLT you should be able to boot into DISCUTIL and see if you can access the disk.
>
> Or, replace the disk and try again :)
>
> SS
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|