7.5 PP5
Ryan C. Melander, V.P.
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]
-----Original Message-----
From: Denys Beauchemin [mailto:[log in to unmask]]
Sent: Tuesday, May 10, 2016 11:58 AM
To: Ryan C. Melander <[log in to unmask]>; [log in to unmask]
Subject: RE: [HP3000-L] hp3000 AUTOCHANGER on MPE
No. There should be a class called SCSI PASSTHRU or some such. It's not a pseudo device, it's a SCSI passthrough driver than sends the scsi commands to the device unaltered.
What rev of MPE are you on?
Denys
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Ryan C. Melander
Sent: Tuesday, May 10, 2016 1:51 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] hp3000 AUTOCHANGER on MPE
By passthru,.. are you saying PSEUDO device?
Ryan C. Melander, V.P.
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]
-----Original Message-----
From: Denys Beauchemin [mailto:[log in to unmask]]
Sent: Tuesday, May 10, 2016 11:49 AM
To: Ryan C. Melander <[log in to unmask]>; [log in to unmask]
Subject: RE: [HP3000-L] hp3000 AUTOCHANGER on MPE
It's been well over a decade, so bear with me.
The ldev for the SCSI address of the tape unit is configured as a standard DDS or DLT. The robot is configured as a scsi-passthru device. You will need software to drive the robot, unless you configure it in semi-automatic mode.
What auto-changer are we talking about here?
Denys
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Ryan C. Melander
Sent: Tuesday, May 10, 2016 1:36 PM
To: [log in to unmask]
Subject: [HP3000-L] hp3000 AUTOCHANGER on MPE
Does anyone remember how to configure an HP auto-changer tape unit on the HP3000? It has two scsi addresses. One for the tape unit, the other for the changer itself.
Ryan C. Melander, V.P.
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]
[ICS_Email_logo]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|