Set the console to 19200
On Apr 28, 2016 6:13 PM, "Billy Brewer" <[log in to unmask]> wrote:

> Hi console has become non-responsive after a very short power bleep.
>
> I'm not there but feel comfortable what I have ask has been done, but
> still nothing on the physical console.  So far:
>
> Walked through console configuration - * in Remote Mode - 9600 Baud -,,,
> all looks good then I had them unplug the cable power cycle the console
> terminal -- reconfirm the configuration then reconnect and still nothing.
>
> I can connect to the GSP port and the session is connected,, but nothing
> is displayed,, <ctrl> A nor <ctrl> B works,, type away but no response.
>
> I can them connect via VT-MGR and take the console :console !hpldevin and
> I receive all the console messages.
>
> So, the messages are being sent (since I see them on the VT connection),
> but neither the physical console nor the GSP gets any console messages and
> both non-responsive.
>
> I hope I'm missing something very simple here -- so, what's the issue --
> thanks.
>
> -Billy
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *