First, I want to thank Ken and Joe and the others that responded to help me. I was unable to get the system recovered remotely. When I went onsite, I found everything appeared ok. It wasn't.
I went into Command View and checked the VA7410 - All Green.
I replaced the Fiber Channel cable. SA 1486
I powered off the A-Class. I pulled the power plug. I waited 30 seconds and powered on. SA 1486
I decided to use Command View to 'Shutdown' the VA7410. When it powered on, one controller had failed. DIMM 1 and DIMM 2.
I replaced both DIMMs. Then one drive failed. Coincidence or stress from power cycle. I don't know.
I tried booting, UPDATE, and booting with MESSAGE. SA1486.
I waited for the drive to spare out. SA1481.
INSTALL. OK
Boot OK.
Restoring now. Fingers crossed. I will run FSCHECK on the other volume sets when the TELESUP account is restored.
If you don't hear more from me, things are probably back to normal.
Again thanks for the help.
Mark Ranft
Pro 3K
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Ken HP3000L
Sent: Saturday, March 28, 2015 3:35 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] System Aborts 558 and 1486
Mark
From the archives it looks like
SYSTEM ABORT 1486 FROM SUBSYSTEM 102
relates to the network if that helps maybe a NOSYSSTART might let you repair the config???
Ken Vickers
On 28/03/2015 06:41, Mark Ranft wrote:
> One of my systems initially died with
>
> SYSTEM ABORT 553 FROM SUBSYSTEM 153
> SYSTEM HALT 7, $0229
>
>
> Now when I attempt to boot I get...
>
> ISL> start norecovery single-disc
> MPE/iX launch facility
>
> Scanning PCI BUS 0 +**.*...........................
> Scanning PCI BUS 10 +...............................
> Scanning PCI BUS 20 +...............................
> Scanning PCI BUS 30 +.+.............................
> Initialize_genesis - Ver bld1: <<pci 2.1601>> Initialize_genesis -
> Relocating pdc...
> Initialize_genesis - Relocate pdc from 0xf0f0000000 to 0x12365000 completed.
> SAT, MAR 28, 2015, 1:16:26 AM (y/n)? y Initialize_genesis = Ready to
> configure I/O [CDM] 03 07 02 12
> td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/0/0
> Scanning for fibre channel devices at 0/2/0/0. This may take a while...
> Initialize genesis completed.
> Create Console Messages kso completed.
> Initialize memory manager completed.
> Initialize resident kernel completed.
> Initialize volume management and mount the System Disk Initialize
> volume management completed.
>
>
> SYSTEM ABORT 1486 FROM SUBSYSTEM 102
> SYSTEM HALT 7, $05CE
>
> ************* SYSTEM ALERT ************** SYSTEM NAME: NODE
> DATE: 03/28/2015 TIME: 06:16:49
> ALERT LEVEL: 12 = Software failure
>
> REASON FOR ALERT
> SOURCE: 0 = unknown, no source stated
> SOURCE DETAIL: 0 = unknown, no source stated SOURCE ID: 0
> PROBLEM DETAIL: 0 = no problem detail
>
> LEDs: RUN ATTENTION FAULT REMOTE POWER
> OFF FLASH FLASH ON ON
> LED State: Unrecognized state - Refer to LED Decoder on your Support CD.
>
> 0xA0E000C00000B007 00000000 00000503 - type 20 = major change in
> system state
> 0x58E008C00000B007 00007302 1C061031 - type 11 = Timestamp 03/28/2015
> 06:16:49
> A: ack read of this entry - X: Disable all future alert messages
> Anything else skip redisplay the log entry
> ->Choice:a
> *****************************************
>
>
> The system boots from VA 7410 array. Command View report that status of the array as all green.
>
> I tried to do an UPDATE NOCONFIG from tape. It completed but I still get the SYSTEM ABORT 1486 from SUBSYS 102.
>
> I do know that...
>
> 553 Extent block does not point to the correct PARENT label.
>
> And
>
> 1486 A trap occurred in the operating system during system boot.
>
> Your suggestions would be appreciated.
>
>
> Mark Ranft
> Pro 3K
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
___________________________________________________
Linkway Software Limited
The Old Surgery, Ercall Heath, Nr. Newport, Shropshire, TF10 8NH Company Registered in England and Wales - No. 7152515 _____________________________________________________
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
