HP3000-L Archives

March 2015, Week 4

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: System Aborts 558 and 1486
From:
Ken HP3000L <[log in to unmask]>
Reply To:
Ken HP3000L <[log in to unmask]>
Date:
Sat, 28 Mar 2015 20:34:49 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (98 lines) 
Mark

 From the archives it looks like

SYSTEM ABORT 1486 FROM SUBSYSTEM 102

relates to the network if that helps maybe a NOSYSSTART might let you repair the config???

Ken Vickers

On 28/03/2015 06:41, Mark Ranft wrote:
> One of my systems initially died with
>
> 	SYSTEM ABORT 553 FROM SUBSYSTEM 153
> 	SYSTEM HALT 7, $0229
>
>
> Now when I attempt to boot I get...
>
> ISL> start norecovery single-disc
> MPE/iX launch facility
>
> Scanning PCI BUS  0   +**.*...........................
> Scanning PCI BUS 10   +...............................
> Scanning PCI BUS 20   +...............................
> Scanning PCI BUS 30   +.+.............................
> Initialize_genesis - Ver bld1: <<pci  2.1601>>
> Initialize_genesis - Relocating pdc...
> Initialize_genesis - Relocate pdc from 0xf0f0000000 to 0x12365000 completed.
> SAT, MAR 28, 2015,  1:16:26 AM (y/n)? y
> Initialize_genesis = Ready to configure I/O
> [CDM] 03 07 02 12
> td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/2/0/0
> Scanning for fibre channel devices at 0/2/0/0. This may take a while...
> Initialize genesis completed.
> Create Console Messages kso completed.
> Initialize memory manager completed.
> Initialize resident kernel completed.
> Initialize volume management and mount the System Disk
> Initialize volume management completed.
>
>
> SYSTEM ABORT 1486 FROM SUBSYSTEM 102
> SYSTEM HALT 7, $05CE
>
> ************* SYSTEM ALERT **************
> SYSTEM NAME: NODE
> DATE: 03/28/2015 TIME: 06:16:49
> ALERT LEVEL: 12 = Software failure
>
> REASON FOR ALERT
> SOURCE: 0 = unknown, no source stated
> SOURCE DETAIL: 0 = unknown, no source stated   SOURCE ID: 0
> PROBLEM DETAIL: 0 = no problem detail
>
> LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
>         OFF      FLASH         FLASH     ON         ON
> LED State: Unrecognized state - Refer to LED Decoder on your Support CD.
>
> 0xA0E000C00000B007 00000000 00000503 - type 20 = major change in system state
> 0x58E008C00000B007 00007302 1C061031 - type 11 = Timestamp 03/28/2015 06:16:49
> A: ack read of this entry - X: Disable all future alert messages
> Anything else skip redisplay the log entry
> ->Choice:a
> *****************************************
>
>
> The system boots from VA 7410 array.  Command View report that status of the array as all green.
>
> I tried to do an UPDATE NOCONFIG from tape.  It completed but I still get the SYSTEM ABORT 1486 from SUBSYS 102.
>
> I do know that...
>
> 553  Extent block does not point to the correct PARENT label.
>
> And
>
> 1486 A trap occurred in the operating system during system boot.
>
> Your suggestions would be appreciated.
>
>
> Mark Ranft
> Pro 3K
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *


___________________________________________________
Linkway Software Limited
The Old Surgery, Ercall Heath, Nr. Newport, Shropshire, TF10 8NH
Company Registered in England and Wales - No. 7152515
_____________________________________________________

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2