What is the subnet mask on each machine
my guess is you have 255.255.0.0 on one and 255.255.255.0 on t'other
Would need 255.255.0.0 on both/all to be able to chat.
How many networks configured on each?
Try:
netcontrol net=xxxx;update=internet
where xxx= name of the LAN
On 07/11/2012 22:24, John Pitman wrote:
> Odd problem I don't recall seeing before...
>
> MPE 7.5 on 192.168.2.0 subnet (my local), remote system, same release on 192.168.5.0. Can logon to both, both have JINETD running, but neither will connect with other, just hangs.
> NETTOOL on the local network cant ping the 5. Machine, but the 5. System can ping the 2. System....?
>
> Only recent change was the external IP of the remote site changed , we had to change address in VPN definition, all seemed OK.
>
> Do one or both machines need to have some cache cleared - ARP ? Don't recall where to do that in nettool.
>
> Suggestions please...
>
> As an aside, looking at the JINETD spoolfile, it says 193 lines, but it will show 1000s of blank lines if asked?
>
> thanks
>
> John Pitman
>
>
> ________________________________
> CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
___________________________________________________
Linkway Software Limited
The Old Surgery, Ercall Heath, Nr. Newport, Shropshire, TF10 8NH
Company Registered in England and Wales - No. 7152515
_____________________________________________________
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|