I never remember whether to press control THEN shift "E" or Press shift THEN control "E" before typing "cf". 

In any case it always works out because I only have a 50:50 chance of getting it wrong.  If so I just do it again the other way.


Tracy Johnson
Office (757) 766-4318
[log in to unmask]


-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Craig Lalley
Sent: Monday, September 10, 2012 10:31 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] ATTN light is blinking

Ray,

Telnet to the GSP,  ^Ecf to get control,  ^b, to access the GSP.

Then "sl" to access the system log.   Just reading the log will clear the light.

-Craig

Sent from my iPad

On Sep 10, 2012, at 7:24 AM, Ray Shahan <[log in to unmask]> wrote:

> Hi all,
> 
> Had a power fail this weekend, and everything seems to be running ok except the hp has a  blinking ATTN light on the front, and the system printer had an error message: "FRAMING ERROR". I rebooted the printer, and it came up fine, and started where it had left off printing.   I then did a RECALL to see if I could get some info on the blinking ATTN light, but got "NO REPLIES PENDING", so not sure what do to at this point.  Wanted to see if it was anything I could quickly resolve, or do I just need to call our support folks?
> 
> We have an "N" class and running RELEASE: C.75.00
> 
> TIA for any insight/help!!
> 
> Ray Shahan
> Computer Programmer
> 214.556.0202
> [log in to unmask]<mailto:[log in to unmask]>
> 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *