The system (in choina) has had a new internmal dds3 fitted by a tech. Trouble with getting a boot stop flag set for a bit, but now system is up. We fitted an external tape drive on the SE scsi socket (addr=3), and it has worked OK several stores through the week, but once seemed to hang at 'unavail sys'.

To try to check how the drive is configured, I tried cstm, but it crashes before getting a prompt -

:cstm

CSTM B8343AA.75.01 Created MON, MAR 25, 2002 2:01 PM

Running Command File (/usr/sbin/stm/ui/config/.stmrc).

　

This operation may take approximately one minute.

**** Data memory protection trap (TRAPS 68).

ABORT: /usr/sbin/stm/ui/bin/stmc

NM USER 231.00016cf4 ccs_determine_select_scope+$8c

NM USER 230.00008a2c ccs_process_uut_status_file+$17c

NM USER 224.00017074 cc_main_loop+$138

NM PROG 223.0000cc84 ccs_perform_ui_startup+$88

/usr/sbin/stm/ui/bin/stmc -c

Program terminated in an error state. (CIERR 976)



I think they have loaded a tape into the internal drive , but it also showed up as 'unavail sys' for  uch longer than I am used to seeing...



Anybody ?

thanks

jp

________________________________
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *