Yes:
IP address [RETURN to quit program.] ? 10.0.1.2
------------------------------------
Remote IP address in hex : $0A000102
------------------------------------
# of packets [1 to 65534] ? 16
# of bytes of data [0 to 2048] ?
---- PING $0A000102 : 64 byte packet(s), 16 packet(s) ----
64 byte(s) from $0A000102 : icmp_seq = 1, time = 3 ms
64 byte(s) from $0A000102 : icmp_seq = 2, time = 1 ms
64 byte(s) from $0A000102 : icmp_seq = 3, time = 1 ms
64 byte(s) from $0A000102 : icmp_seq = 4, time = 1 ms
64 byte(s) from $0A000102 : icmp_seq = 5, time = 1 ms
64 byte(s) from $0A000102 : icmp_seq = 6, time = 1 ms
64 byte(s) from $0A000102 : icmp_seq = 7, time = 1 ms
On Wed, Aug 3, 2011 at 9:47 PM, Denys Beauchemin <[log in to unmask]> wrote:
> Can you actually ping that 10 address from the HP3000?
>
> Denys
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> Of Cornelia Sellitto
> Sent: Wednesday, August 03, 2011 8:38 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] nmMAIL socket error
>
> Mike and List -
> Here's part of the job that's used to send email - previously worked with
> an
> external IP address through the SMTP server - note commented out old
> address; new address in the '10' range.
>
> !JOB TABCDS,MGR/pwd.acct;HIPRI
> !SETJCW CIERROR=0
> !comment setvar mailsmtphost '64.59.192.3'
> !setvar mailsmtphost '10.0.1.2'
> !setvar mailfrom [log in to unmask]
> !setvar MAILRECVTIMEOUT 300
> !SETVAR MAILCONNECTTIMEOUT 300
> !nmMAIL.O " -t [log in to unmask] -pri H &
> : -s 'Testing email' -m emailcds -a filetest.txt"
> !IF CIERROR = 0 THEN
> !tell connie,mgr.catfancy; TABCDS job has completed successfully !SET
> STDLIST=DELETE !ELSE !TELL CONNIE,MGR.CATFANCY; Sorry - TAB job failed -
> check STDLIST !eoj On Wed, Aug 3, 2011 at 9:19 PM, Michael Lynn
> <[log in to unmask]> wrote:
>
> > Hello List,
> >
> >
> >
> > I have inherited an HP but am a novice. I have a question regarding
> > emailing from it using nmMAIL through an anonymous relay on Exchange.
> > I am getting this error:
> >
> >
> >
> > nmmail[124] OpenSocket: IPCRECV: SOCKET TIMEOUT. (SOCKERR 59)
> >
> > I have tested my relay from a Windows host using telnet to port 25 and
> > successfully sent email.
> >
> >
> >
> > Connie Sellitto suggested I try the list to see what turns up :).
> >
> >
> >
> > Any thoughts?
> >
> >
> >
> > Michael Lynn
> >
> > Network Administrator
> >
> > Cat Fanciers' Association
> >
> >
> >
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
