Chuck,
In the message,
16:24 /#J1/52/stat on "/etc/bootptab": No such file or directory
The 52, is for the PIN number not the tape drive.
Job #J1 is probably JINETD.NET.SYS
If you look at the configuration file
INETDCNF.NET.SYS there is a line for "bootps"
Comment out that line and the problem should go away.
-Craig
--- On Wed, 7/27/11, Chuck Trites <[log in to unmask]> wrote:
> From: Chuck Trites <[log in to unmask]>
> Subject: Console Error on JINETD job after adding a DLT drive
> To: [log in to unmask]
> Date: Wednesday, July 27, 2011, 1:37 PM
> Hi Everyone,
>
> I had to install a DLT drive to read a client's backup
> tape on my 3000. After adding the DLT and board
> to accommodate the drive, an error has been coming up on
> the console constantly. 16:24 /#J1/52/stat on
> "/etc/bootptab": No such file or directory
> How can I get rid of this error? Can I change
> something on the configuration of the drive or Path of the
> tape drives which is 52, or can I get a copy of the file
> it's looking for? Not a biggie, but an annoying problem.
>
> Thanks,
> Chuck Trites
> >[log in to unmask]
> >Trites Consulting, Inc.
> >181 Hillcrest Drive
> >Laconia, NH 03246
> >Phone: (603) 219-1500
>
> * To join/leave the list, search archives, change list
> settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
