Devctrl "LDEV" compression=disable
Ryan C. Melander
Ideal Computer Services, Inc.
88 Wright Brothers Ave.
Livermore, CA 94551
Ph. 800-862-8787
Ph. 925-447-4747 x213
Fx. 925-447-4780
mailto:[log in to unmask]
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Hawkins, Jim (ESSN TCE&Q)
Sent: Wednesday, July 06, 2011 3:04 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] DLT8000 1/9 Autoloader
Larry,
Memory is fading but DEVCTRL.MPEXL.TELESUP (?) should work fine, especially
with say 6.5 or 7.0 or 7.5. That is I know that code was in place in the
tape driver to implement that SCSI mode page settings and they were passed
to the device for firmware to act upon. I recall that in later generation
tapes (LTO/Ultrium for sure) that tape firmware started apparently ignoring
these directives though -- that is during testing we could not perceive any
difference in performance or tape capacity with this on or off. YMMV.
Jim
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Kaufman, Larry
Sent: Wednesday, July 06, 2011 12:12 PM
To: [log in to unmask]
Subject: [HP3000-L] DLT8000 1/9 Autoloader
Hello-
Does anyone know how to disable compression on a DLT8000 1/9 Autoloader?
On the stand-alone model, there is a button on the panel. However the
Autoloader does not have an option via the front panel. We are using Orbit's
Backup Plus and we want to disable compression.
Thanks!
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html
<http://raven.utc.edu/archives/hp3000-l.html> *
Confidentiality Notice
This e-mail and the documents accompanying this transmission contain
confidential information belonging to the sender which is legally
privileged. The information is intended only for the use of the individuals
or entities named above. If you are not the intended recipient, you are
hereby notified that any disclosure, copying, or distribution or the taking
of any action in reliance on the contents of this e-mailed information is
strictly prohibited. If you have received this e-mail in error, please
immediately notify the sender by e-mail at the address above. The
transmission is to be deleted and any items that may have been printed are
to be destroyed. Thank you for your compliance.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
