Thanks to all. You guys are like the Royal Family of HP 3000. :-)
Lawrence Kaufman
Systems Engineer / Analyst
Weltman, Weinberg & Reis Co., LPA
216-739-5786 phone
[log in to unmask]
965 Keynote Circle | Brooklyn Heights, Ohio 44131 | weltman.com
Confidentiality Notice
This e-mail and the documents accompanying this transmission contain
confidential information belonging to the sender which is legally
privileged. The information is intended only for the use of the
individuals or entities named above. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, or
distribution or the taking of any action in reliance on the contents
of this e-mailed information is strictly prohibited. If you have
received this e-mail in error, please immediately notify the sender
by e-mail at the address above. The transmission is to be deleted
and any items that may have been printed are to be destroyed. Thank
you for your compliance.
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Hawkins, Jim (ESSN TCE&Q)
Sent: Wednesday, July 06, 2011 6:04 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] DLT8000 1/9 Autoloader
Larry,
Memory is fading but DEVCTRL.MPEXL.TELESUP (?) should work fine,
especially with say 6.5 or 7.0 or 7.5. That is I know that code was in
place in the tape driver to implement that SCSI mode page settings and
they were passed to the device for firmware to act upon. I recall that
in later generation tapes (LTO/Ultrium for sure) that tape firmware
started apparently ignoring these directives though -- that is during
testing we could not perceive any difference in performance or tape
capacity with this on or off. YMMV.
Jim
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Kaufman, Larry
Sent: Wednesday, July 06, 2011 12:12 PM
To: [log in to unmask]
Subject: [HP3000-L] DLT8000 1/9 Autoloader
Hello-
Does anyone know how to disable compression on a DLT8000 1/9 Autoloader?
On the stand-alone model, there is a button on the panel. However the
Autoloader does not have an option via the front panel. We are using
Orbit's Backup Plus and we want to disable compression.
Thanks!
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html
<http://raven.utc.edu/archives/hp3000-l.html> *
Confidentiality Notice
This e-mail and the documents accompanying this transmission contain
confidential information belonging to the sender which is legally
privileged. The information is intended only for the use of the
individuals or entities named above. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, or
distribution or the taking of any action in reliance on the contents of
this e-mailed information is strictly prohibited. If you have received
this e-mail in error, please immediately notify the sender by e-mail at
the address above. The transmission is to be deleted and any items that
may have been printed are to be destroyed. Thank you for your
compliance.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
