Can you run that in :break? Because if not, there's no way to execute
that while the process I'm interested in is running. No networking or
dtc on the box yet!
On 4/26/11, John Pitman <[log in to unmask]> wrote:
> Showproc job=@ might show you activity
>
> Regards,
>
> John Pitman
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> Of Mark Landin
> Sent: Wednesday, 27 April 2011 4:31 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Install hanging while installing FOS
>
> This system has been successfully using another model 20 for over10 years.
> Both the old and the new arrays were connected to two add-on FWSCSI cards.
>
> Note that I had no problems doing the INSTALL from factory SLT using the
> same tape drive and disk array.
>
> On 4/26/11, Gilles Schipper <[log in to unmask]> wrote:
>> I'm guessing bad tape or tape drive drive, unless .....
>>
>> Is it possible the FWSCSI adapter that your mod20 is attached to has
>> old firmware.
>>
>> Must be rev. 3636 or newer. 3728 is best, but will work with 3636.
>>
>> You mention the system is a 939.
>>
>> Is the mod20 attached to the FWSCSI port of the MFIO card?
>>
>> Or is it to an optional add-on FWSCSI card?
>>
>> If the latter, it is possible you could have older firmware.
>>
>>
>>
>> At 01:04 PM 2011-04-26, Mark Landin wrote:
>>>Two problems with that:
>>>1) I don't own GLANCE
>>>2) I don't even have FOS loaded yet. Glance isn't part of factory SLT,
>>>is it?
>>>
>>>On Tue, Apr 26, 2011 at 11:30 AM, Keven Miller <[log in to unmask]>
>>> wrote:
>>>
>>> > I was thinking Glance to show whats going on.
>>> > But showdev tape will show if the device has been allocated yet.
>>> >
>>> > I have some vague memory of similar instance where I thought it
>>> > should be reading the tape.
>>> > But the software was doing house cleaning and just took awhile
>>> > before it got to the actual restore.
>>> >
>>> > Hence, the thought of Glance to show whats happening, cpu% etc.
>>> >
>>> > Keven Miller
>>> >
>>> >
>>> > * To join/leave the list, search archives, change list settings, *
>>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>> >
>>>
>>>
>>>
>>>--
>>>"He's old enough to know what's right and young enough not to choose it.
>>>He's strong enough to win the world and weak enough to lose it." -
>>>Neal Peart
>>>
>>>* To join/leave the list, search archives, change list settings, *
>>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>
>> ----------------------------------------------------------------------
>> ---------------------------
>> Gilles Schipper
>> GSA Inc.
>> HP System Administration Specialists
>> 300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
>> Tel: 416.702.7900
>> email: [log in to unmask] web: http://www.gsainc.com
>> ----------------------------------------------------------------------
>> ---------------------------
>>
>>
>>
>
> --
> Sent from my mobile device
>
> "He's old enough to know what's right and young enough not to choose it.
> He's strong enough to win the world and weak enough to lose it." - Neal
> Peart
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> CAUTION: This message may contain privileged and confidential information
> intended only for the use of the addressee named above. If you are not the
> intended recipient of this message you are hereby notified that any use,
> dissemination, distribution or reproduction of this message is prohibited.
> If you have received this message in error please notify RYCO Hydraulics
> Pty. Ltd. immediately. Any views expressed in this message are those of the
> individual sender and may not necessarily reflect the views of RYCO
> Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
Sent from my mobile device
"He's old enough to know what's right and young enough not to choose
it. He's strong enough to win the world and weak enough to lose it." -
Neal Peart
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
