Could it be he went from SE drives to DF (f/w) disk and left them on the se
bus.... 56/52? Im just looking at his subject line...
Ryan C. Melander
-----Original message-----
From: Mark Landin <[log in to unmask]>
To: [log in to unmask]
Sent: Thu, Jan 1, 1970 00:00:00 GMT+00:00
Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
Because he REMOVED the internal drives and hooked up external ones!!
So yes, there was no longer a device at the original primary boot
path.
On 2/23/11, Gilles Schipper <[log in to unmask]> wrote:
> Not only by default.
>
> Under ALL circumstances, the INSTALL installs to the disk identified
> by the primary path.
>
> So, yes, it's curious that path 56/52.5 is identified as the disk
> that can't be accessed.
>
> Something is wrong with the picture being painted.
>
> The INSTALL attempt identifies 56/52.5 as the target disk (LDEV 1).
>
> Yet the search command identifies disks at 56/36.5 and 56/36.6 - and
> no device at 56/52.5.
>
> So, according to what is being shown here, the primary path needs to
> be changed to either 56/36.5 or 56/36.6.
>
> The question is - why does the primary path point to a non-existent
device?
>
> Is it because it has somehow changed since last successful INSTALL -
> or is the device at that address completely non-functional such that
> it will even identify itself?
>
>
>
> At 07:21 PM 2011-02-23, Ryan C. Melander wrote:
>>I thought by default the install would go to the PRI path. Thus the
>>56/52.5 error
>>
>>Ryan C. Melander
>>Ideal Computer Services, Inc.
>>88 Wright Brothers Ave.
>>Livermore, CA 94551
>>Ph. 800-862-8787
>>Ph. 925-447-4747 x213
>>Fx. 925-447-4780
>>mailto:[log in to unmask]
>>
>>
>>-----Original Message-----
>>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
>>Behalf Of Mark Landin
>>Sent: Wednesday, February 23, 2011 3:26 PM
>>To: [log in to unmask]
>>Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
>>
>>No guys, look: his path for his NEW disk is 56/36.5. His pri path is
>>set to 56/52.6. INSTALL can't find the primary path to install
>>anything on! he has to set his PRI path to 56/36.5.
>>
>>On Wed, Feb 23, 2011 at 5:05 PM, Ryan C. Melander
>> <[log in to unmask]>wrote:
>>
>> > If your disk are the same address as the old ones. .5 and .6 and the
>> > system
>> > reports: > Can't access disk at 56/52.5.0 .... your primary boot
>> > path is
>> > 56/52.5 (normally it should be 56/52.60 but that's ok) I would say
>> > you either have another bad disk at 56/52.5 or your SCSI address
>> > jumpers are wrong.
>> >
>> > Ryan
>> >
>> >
>> > Ryan C. Melander
>> > Ideal Computer Services, Inc.
>> > 88 Wright Brothers Ave.
>> > Livermore, CA 94551
>> > Ph. 800-862-8787
>> > Ph. 925-447-4747 x213
>> > Fx. 925-447-4780
>> > mailto:[log in to unmask]
>> >
>> >
>> > -----Original Message-----
>> > From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
>> > Behalf Of Paul Edwards
>> > Sent: Wednesday, February 23, 2011 2:59 PM
>> > To: [log in to unmask]
>> > Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
>> >
>> > Did you set the SCSI address correctly on the new drive?
>> >
>> > ***************************************************************
>> > CDR Paul Edwards USNR Ret. HP 3000 Certified Consultant
>> > Paul Edwards & Associates
>> > 1506 Estates Way Phone: (972) 242-6660
>> > Carrollton TX 75006 Cel : (214) 384-8728
>> > Email: [log in to unmask] Web : www.peassoc.com
>> > ***************************************************************
>> >
>> >
>> > -----Original Message-----
>> > From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
>> > Behalf Of Harpreet SINGH
>> > Sent: Wednesday, February 23, 2011 4:48 PM
>> > To: [log in to unmask]
>> > Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
>> >
>> > Hi,
>> >
>> > But I am replacing the disk one to one.
>> >
>> > With Warm Regards
>> > =-=-=-=-=-=-=-=-=-=-=-=-=-
>> > Harpreet Singh Chana
>> >
>> > Phone : (O) 6895 - 4326
>> > Fax : (O) 6895 - 4991
>> > =-=-=-=-=-=-=-=-=-=-=-=-=-
>> > Please do not print this email unless it is absolutely necessary.
>> >
>> >
>> > Notice
>> > The information in this message is confidential and may be legally
>> > privileged. It is intended solely for the addressee. Access to this
>> > message by anyone else is unauthorized. If you are not the intended
>> > recipient, any disclosure, copying or distribution of the message,
>> > or any action taken by you in reliance on it, is prohibited and may
>> > be unlawful.
>> > If you have received this message in error, please delete it and
>> > contact the sender immediately. Thank you.
>> >
>> >
>> >
>> >
>> >
>> > Mark Landin
>> > <marklandin@GMAIL
>> > .COM>
>> > To
>> > Sent by: HP-3000 [log in to unmask]
>> > Systems
>> > cc
>> > Discussion
>> > <[log in to unmask]
>> > Subject
>> > TC.EDU <http://tc.edu/>> Re: [HP3000-L]
>> > Replacement of SE
>> > Scsi to DF Scsi Storage.
>> >
>> > 02/24/2011 06:11
>> > AM
>> >
>> >
>> >
>> > Please respond to
>> > Mark Landin
>> > <marklandin@GMAIL
>> > .COM>
>> >
>> >
>> >
>> >
>> >
>> >
>> > When you replaced the disk drives, notice how their hardware path
>> > changed.
>> >
>> > Now check what your PRI boot path is. that's where the CSLT will try
>> > to install things. You will need to change your PRI boot path to the
>> > hardware path of one of the new disks you put in. This will become LDEV
>> > 1.
>> >
>> > On Wed, Feb 23, 2011 at 2:58 PM, Harpreet SINGH <
>> > [log in to unmask]> wrote:
>> >
>> > > Hi,
>> > >
>> > > I have managed to verify the CSLT Tape on working server and found
>> > > no errors.
>> > >
>> > > I have taken out this working Tape drive from the working server in
>> > > Replaced with the suspected faulty Tape drive.
>> > >
>> > > -- On server Side I have inserted two Disk in the disk enclosure.
>> > > -- Restart the Server
>> > > -- Search for the Hardware
>> > > -- I found 3 devices
>> > > i.e.
>> > > -- P0 56/36.5 DISK
>> > > --P1 56/36.6 DISK
>> > > --P2 56/52/0 TAPE
>> > >
>> > > So I boot the server with bo p2
>> > > Interact with IPL = N
>> > >
>> > > ISL > Install
>> > >
>> > > I got the messages
>> > >
>> > > Can't access disk at 56/52.5.0 ....
>> > > System Abort 55 from Syb System 146
>> > > Sec Status: info -31281, Subsystem = 213 System Halt 7, $0037
>> > > --
>> > > "He's old enough to know what's right and young enough not to choose
>> > > it.
>> > > He's strong enough to win the world and weak enough to lose it." -
>> > > Neal Peart
>> > >
>> >
>> > * To join/leave the list, search archives, change list settings, *
>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> >
>> > ForwardSourceID:NT0019F97A
>> >
>> > * To join/leave the list, search archives, change list settings, *
>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> >
>> > * To join/leave the list, search archives, change list settings, *
>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> >
>> > * To join/leave the list, search archives, change list settings, *
>> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>> >
>>
>>
>>
>>--
>>"He's old enough to know what's right and young enough not to choose it.
>>He's strong enough to win the world and weak enough to lose it." - Neal
>> Peart
>>
>>* To join/leave the list, search archives, change list settings, *
>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>
>>* To join/leave the list, search archives, change list settings, *
>>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
-----------------------------------------------------------------------------
--------------------
> Gilles Schipper
> GSA Inc.
> HP System Administration Specialists
> 300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> Tel: 416.702.7900
> email: [log in to unmask] web: http://www.gsainc.com
>
-----------------------------------------------------------------------------
--------------------
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
Sent from my mobile device
"He's old enough to know what's right and young enough not to choose
it. He's strong enough to win the world and weak enough to lose it." -
Neal Peart
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
