Thanks for this worked fine, but strange.
I did not have the setparms file, so I built it, put in the command, saved it. I expected to have to stop jinetd, but it seems that the file got read and the msgs have stopped.
Many thanks...
Regards,
John Pitman
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Francois Desrochers
Sent: Thursday, 25 November 2010 3:45 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] ftp msgs from jinetd on console
John,
From FTPDOC.ARPA.SYS:
************************************************************************
CONSOLE_LOGGING option
************************************************************************
The "CONSOLE_LOGGING = ON" SETPARMS.ARPA.SYS configuration option is a security enhancement added to the FTP Server "FTPSRVR" to support the "logging" of MPE session logon attempts (success and failure) on inbound FTP connections to the HP e3000 system. These messages are logged on the system console as well as to the MPE system logfiles.
The system default for this enhancement is "CONSOLE_LOGGING = ON". This option can be disabled by adding the line "CONSOLE_LOGGING = OFF" to the file SETPARMS.ARPA.SYS with a supported text EDITOR.
HTH
François
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of donna hofmeister
Sent: Wednesday, November 24, 2010 11:38 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] ftp msgs from jinetd on console
Check bldparms.arpa.sys - d
---
Donna Hofmeister
Allegro Consultants, Inc.
408-252-2330
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> Behalf Of John Pitman
> Sent: Tuesday, November 23, 2010 6:03 PM
> To: [log in to unmask]
> Subject: [HP3000-L] ftp msgs from jinetd on console
>
> I have 2 systems on 7.5, both appear to have same config in inetdcnf,
> but one of them logs every ftp connection request from another system
> on the console, the other doesn't log anything.
>
> I have tried
> Inetd.net;info="-l"
>
>
> From prompt, but nothing changes.
> Do I need to stop jinetd and restart it, or add ;info="-l" to the
> inetd invocation or ?
>
> thanks
>
> Regards,
>
> John Pitman
>
> ________________________________
> CAUTION: This message may contain privileged and confidential
> information intended only for the use of the addressee named above. If
> you are not the intended recipient of this message you are hereby
> notified that any use, dissemination, distribution or reproduction of
> this message is prohibited. If you have received this message in error
> please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
> expressed in this message are those of the individual sender and may
> not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
