A for Awesome? :)
On 11/13/10, Ryan C. Melander <[log in to unmask]> wrote:
> I believe its A
>
> Ryan C. Melander
> Ideal Computer Services, Inc.
> 88 Wright Brothers Ave.
> Livermore, CA 94551
> Ph. 800-862-8787
> Ph. 925-447-4747 x213
> Fx. 925-447-4780
> [log in to unmask]
>
>
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
> Of Mark Landin
> Sent: Saturday, November 13, 2010 12:14 PM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] System abort 2173 from subsys 151
>
> It's Ctrl-P, then FE (caps important). That puts the array into Field
> Engineer mode. Repeating this turns FE mode back off.
>
> I forget whihc host type represents MPE. Maybe 2? Or 0. Hopefully someone
> will know for sure.
>
> On 11/13/10, Chad Lester <[log in to unmask]> wrote:
>> As Jack and Craig mentioned:
>>
>> The setting is not a physical switch... Using the GridMgr cable the
>> terminal needs to be put into CE mode (which I believe is set via a
>> CTRL-P). This will unhide new menu options and the screen will say FE in
>> the top corner.
>> The option you are looking for is under package options.
>>
>> Another potential problem could be the firmware on the HP28696As...
>> they need to be 3728 oe 3944.
>>
>> Does the INSTALL actually start or does it just hang with an "INSTALL..."
>> ?
>>
>> Good luck
>>
>>
>> Thanks,
>> Chad
>> MPESG, Inc
>> 512-586-1457
>>
>> On Nov 12, 2010, at 10:49 PM, Greg Terterian <[log in to unmask]> wrote:
>>
>>> I am trying to build a new 979 machine. It has a wide scsi card and
>>> is connected to MOD20 disk array.
>>> I start the system from Tape (using my custom sysgen tape) and at ISL
>>> prompt I type 'INSTALL'...
>>>
>>> After couple of minutes, it comes back with:
>>>
>>> System abort 2173 from Subsystem 151
>>>
>>> and then I get System Halt 7
>>>
>>> Greg is not in town and I would really appreciate a help!
>>>
>>> Thanks a million in advance!
>>> David Raschka
>>>
>>>
>>> PS: I already verified that the primary path is correct and is
>>> pointing to
>>> MOD20 disk array.
>>> Any suggestions will be appreciated!
>>>
>>>
>>>
>>>
>>> * To join/leave the list, search archives, change list settings, *
>>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>>
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>>
>
> --
> Sent from my mobile device
>
> "He's old enough to know what's right and young enough not to choose it.
> He's strong enough to win the world and weak enough to lose it." - Neal
> Peart
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
--
Sent from my mobile device
"He's old enough to know what's right and young enough not to choose
it. He's strong enough to win the world and weak enough to lose it." -
Neal Peart
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
