This is the batch job I use to change the time.
!JOB SETCLOCK,MANAGER.SYS;HIPRI;OUTCLASS=LP,1
!SETCLOCK TIMEZONE=W6:00
!SHOWCLOCK
!SETCLOCK;CANCEL
!SHOWCLOCK
!SETCLOCK DATE=11/07/10;TIME=01:00;NOW
!PAUSE 5
!SHOWCLOCK
!EOJ
Thanks,
Kris Williams
Sr. Manager, CIS, ITIL v3
Gen 9 V-Pilot
CalsonicKansei North America
[log in to unmask]
(931) 680-6433 Direct
(931) 684-2724 Fax
(931) 205-3048 Cell
Let's stop being passive and waiting to be told what to do, and instead
let's make decisions ourselves.
This e-mail may contain PRIVILEGED and CONFIDENTIAL information and is
intended only for the use of the specific individual(s) to whom it is
addressed. If you are not the intended recipient of this e-mail, you are
hereby notified that any unauthorized use, dissemination or copying of
this e-mail of the information contained within or attached to it, is
strictly prohibited. If you have received this e-mail in error, please
immediately notify the person named above by reply e-mail and delete the
e-mail. Thank you.
From:
Jack Connor <[log in to unmask]>
To:
[log in to unmask]
Date:
11/10/2010 01:46 PM
Subject:
Re: [HP3000-L] Why won't my clock fall back?
GMT at this mailing is 7:43PM, so your system clock is off by probably an
hour.
You can either use the SETCLOCK DATE=;TIME= to get it correct or use
CLKUTIL at the ISL on a reboot...
This is at least the ways I know how to fix it, but there may be others
that can offer another solution.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Newton, Ernie
Sent: Wednesday, November 10, 2010 2:24 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Why won't my clock fall back?
I guess I should've posted the entire thing.
Here's the entire SHOWCLKS return...
CI:SHOWCLKS.PUBXL.TELESUP
SHOWCLKS/XL A.10.00
DEBUG/iX C.25.06
HPDEBUG Intrinsic at: 360.00007258 PROGRAM+$198
PRIV=$3 := $0
*************************************************************
*** ***
*** Greenwich Mean Time : WED, NOV 10, 2010, 8:19 PM ***
*** GMT/MPE offset : -8:00:00 ***
*** MPE System Time : WED, NOV 10, 2010, 12:19 PM ***
*** ***
*************************************************************
**** C Library Information ****
Current value of Time Zone(TZ) variable : NOT ASSIGNED
CTIME function return : Wed Nov 10 15:19:23 2010
Ernie
-----Original Message-----
From: Jack Connor [mailto:[log in to unmask]]
Sent: Wednesday, November 10, 2010 11:18 AM
To: Newton, Ernie; [log in to unmask]
Subject: RE: Why won't my clock fall back?
What does GMT show? The system time should be offset 8 hours from that. If
it's off, then that would explain the error.
Do you have the notes on installing TZTAB? I think there's a version out
on Client System's site if not.
jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Newton, Ernie
Sent: Wednesday, November 10, 2010 1:56 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Why won't my clock fall back?
Hi Jack,
I think you might be on to something.
This is what SHOWCLKS shows at the end...
Current value of Time Zone(TZ) variable : NOT ASSIGNED
CTIME function return : Wed Nov 10 14:47:59 2010
Currently it's 10:52, so I don't know where 14:47 is coming from.
And my Time Zone variable on my other system is PST8PDT.
So, what now?
Thanks,
Ernie
-----Original Message-----
From: Jack Connor [mailto:[log in to unmask]]
Sent: Wednesday, November 10, 2010 10:48 AM
To: Newton, Ernie; [log in to unmask]
Subject: RE: Why won't my clock fall back?
Hi Ernie,
Assuming you're on Pacific time, what does SHOWCLKS.PUBXL.TELESUP show?
Here's a box in San Diego.
:showclks.pubxl.telesup
SHOWCLKS/XL A.10.00
DEBUG/iX C.25.06
HPDEBUG Intrinsic at: 3d3.00007258 PROGRAM+$198
PRIV=$3 := $0
*************************************************************
*** ***
*** Greenwich Mean Time : WED, NOV 10, 2010, 6:39 PM ***
*** GMT/MPE offset : -8:00:00 ***
*** MPE System Time : WED, NOV 10, 2010, 10:39 AM ***
*** ***
*************************************************************
**** C Library Information ****
Current value of Time Zone(TZ) variable : PST8PDT
CTIME function return : Wed Nov 10 10:39:09 2010
:
Jack
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Newton, Ernie
Sent: Wednesday, November 10, 2010 1:27 PM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: [HP3000-L] Why won't my clock fall back?
Greetings,
I ran a job to set my clock back one hour, but it didn't.
Looking at the STDLIST, it ran "SETCLOCK TIMEZONE = W8:00", but them came
back with "CURRENT TIME CORRECTION: 0 SECONDS".
The clock is still ahead by one hour.
Can I just run SETCLOCK TIME=actual time...?
Thanks,
Ernie
This message, including any attachments, is intended solely for the use of
the named recipient(s) and may contain confidential and/or privileged
information. Any unauthorized review, use, disclosure or distribution of
this communication(s) is expressly prohibited. If you are not the intended
recipient, please contact the sender by reply e-mail and destroy any and
all copies of the original message.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers,
workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain
confidential information. It is solely for the use of the intended
recipient(s). Unauthorized interception, review, use or disclosure is
prohibited and may violate applicable laws including the Electronic
Communications Privacy Act. If you are not the intended recipient, please
contact the sender and destroy all copies of the communication.
________________________________
This message, including any attachments, is intended solely for the use of
the named recipient(s) and may contain confidential and/or privileged
information. Any unauthorized review, use, disclosure or distribution of
this communication(s) is expressly prohibited. If you are not the intended
recipient, please contact the sender by reply e-mail and destroy any and
all copies of the original message.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers,
workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain
confidential information. It is solely for the use of the intended
recipient(s). Unauthorized interception, review, use or disclosure is
prohibited and may violate applicable laws including the Electronic
Communications Privacy Act. If you are not the intended recipient, please
contact the sender and destroy all copies of the communication.
________________________________
This message, including any attachments, is intended solely for the use of
the named recipient(s) and may contain confidential and/or privileged
information. Any unauthorized review, use, disclosure or distribution of
this communication(s) is expressly prohibited. If you are not the intended
recipient, please contact the sender by reply e-mail and destroy any and
all copies of the original message.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
Be sure to ask us about short term and long term rentals on servers,
workstations, storage and more!
CONFIDENTIALITY NOTICE: This communication with its contents may contain
confidential information. It is solely for the use of the intended
recipient(s). Unauthorized interception, review, use or disclosure is
prohibited and may violate applicable laws including the Electronic
Communications Privacy Act. If you are not the intended recipient, please
contact the sender and destroy all copies of the communication.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
