- No replies pending on console.
- All volume sets and disk devices are available, healthy, and not full.
- There is no active session on LDEV 20, but checking :SHOWDEV again shows
it as "UNAVAIL", by "SYS: #1". I did an ABORTIO on that LDEV until it
confirmed there was no more I/O..now the console will not respond to a
CRTL-A anymore, although it will to a CTRL-B.
- I swtiched the console to my device temporarily, and now cannot switch
console back to LDEV 20 as it says "Device is owned by another process".
We are on MPE/iX 6.5
I expect we're going to schedule a reboot, but will probably have to wait
until the weekend.
On Thu, Jul 8, 2010 at 8:55 AM, Johnson, Tracy
<[log in to unmask]>wrote:
> Any number of things.
>
> It could be in the middle of a program that is hung. For any reason.
>
> It could be in the middle of a program waiting for a REPLY, (Control-A,
> RECALL may fix that.)
>
> You could be out of disc space. Which may be highly likely if you had a
> MOD 20 failure. A Volume_Set could be inadvertently dismounted.
> (Symptoms are similar to out of disc space conditions.)
>
> Tracy Johnson
> Office 1-757-766-4318
> [log in to unmask]
>
>
> > -----Original Message-----
> > From: HP-3000 Systems Discussion
> > [mailto:[log in to unmask]] On Behalf Of Mark Landin
> > Sent: Thursday, July 08, 2010 9:39 AM
> > To: [log in to unmask]
> > Subject: [HP3000-L] Console not responding
> >
> > Hey folks.
> >
> > We have a 700/96 connected to our 939KS/020 as the console.
> > This morning, we
> > can't get a login prompt on it. We can Ctrl-B just fine, we
> > see console
> > messages, and showdev looks normal. We checked the terminal
> > and datacomm
> > config ... all OK. We even hooked up another known good
> > 700/96, and get the
> > same behavior.
> >
> > A bit of recent history ... we recently had an overtemp
> > condition in our
> > machine room on Tuesday, and the system shut down. The Model
> > 20 we have
> > connected wouldn't come back up until we replaced one of the
> > (supposedly
> > redundant?) SP's, and then the machine seemed to boot fine.
> > It ran without
> > incident the rest of Tuesday and all day yesterday.
> >
> > So, any ideas? I vaguely remember reading about problems if
> > the console
> > buffer filled up, but don't recall any details, especially
> > how to clear that
> > condition if, in fact, it exists.
> >
> > --
> > "He's old enough to know what's right and young enough not to
> > choose it.
> > He's strong enough to win the world and weak enough to lose
> > it." - Neal
> > Peart
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
--
"He's old enough to know what's right and young enough not to choose it.
He's strong enough to win the world and weak enough to lose it." - Neal
Peart
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|