"error -28 from procedure -49 is a time-out during device binding"

 

perhaps you can power cycle the device at 48.4.0 to give it a second

chance to power up correctly... and try another reboot.

 

Then consider replacing it after a backup...

 

Of course that is assuming that nothing was changed in the sysgen IO config prior to the

power off/reboot that might be causing problems...

 

Thanks,

Gary
 
> Date: Tue, 16 Mar 2010 12:42:25 -0500
> From: [log in to unmask]
> Subject: Does this smell like a...
> To: [log in to unmask]
> 
> ...bad disc?
> 
> "...I went in the computer room and did a shutdown and turned the
> power off to the system. When I do the start norecovery and get to
> the io config part of the reboot it gives me 2 errors
> 
> 1. LLIO Error-subsys 213, proc num-49 error num -28 for path 48.4.0
> 
> 2. Error LLIO device config error -11 status – subsys#1 SO info: #-11"
> 
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
 		 	   		  
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *