So, it ships with the A & N class on 7.0 +
but not with the 9x9, right?
I know what I need to do, no longer clueless, thanks all.
Mike.
Gilles Schipper wrote:
> You need more than just the appropriate powerpatch.
>
> You also need the software itself, which is not "standard".
>
> Rather, for all non A-class and non N-class HPe3000's it's an add-on
> and would be located on an "add-on" or "subsys" tape.
>
> At 03:40 PM 2010-02-18, Michael wrote:
>> I thought MPE 7.0 pp2 had all the necessary patches for the BT100 to
>> function properly, correct me if I am wrong.
>>
>> On a 9x9 (K-Box) running MPE 7.0 pp2:
>> Installed the BT100 board
>> Ran mapper found the bt100 to be at /10/4/16.
>>
>> NMMGR, modified both DTSLINK & NS type and path.
>>
>> Validate both NS and DTS, OK.
>>
>> REBOOT, with the following error:
>> DCC ERROR 15-3 link error status FBFD032C LLIO PATH (DCCERR 19)
>> DCC START ERROR
>>
>> So, what I am I missing?
>>
>> Any clues much appreciated.
>> Mike.
>>
>> * To join/leave the list, search archives, change list settings, *
>> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> -------------------------------------------------------------------------------------------------
>
> Gilles Schipper
> GSA Inc.
> HP System Administration Specialists
> 300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> Tel: 416.702.7900
> email: [log in to unmask] web: http://www.gsainc.com
> -------------------------------------------------------------------------------------------------
>
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|