Giles,
The other thing you will get with 7.5 (amongst many changes ?) is access to all of ldev 1 if its bigger than - what 4GB? I recall waiting with bated breath for what would happen on the last reboot when I installed 7.5 over 7.0, and IIRC, it just did its thing and came up with lots more space . We have an 18GB ldev 1 and a 36GB ldev 2.
I dont think I could live without autoanswer now, having been used to it for ages now. All our backups are scheduled jobs overnight.
Our Dat40x6 autoloader died last year - woulnt bring tapes to ready state. The service people were a bit lost for a while, and took the unit back to base to play with. Tried swapping another drive mech into our chassis, but in the end replaced the whole unit.
jp
________________________________________
From: Gilles Schipper [[log in to unmask]]
Sent: Saturday, 30 January 2010 9:43 AM
To: John Pitman
Subject: RE: [HP3000-L] dat72 autoloader
John,
I noticed that your autoloader is configured with id=ddsauto.
That id is not available with the MPE version I'm running - which is 7.0.
So I'm going to update to 7.5, modify my config. and see what happens.
Will let you know.
Cheers,
At 09:50 PM 2010-01-28, you wrote:
>Starting to sound like a dud then, if end of a store doesn't load next tape.
>When you load magazine does it do an inventory and tell you which
>slots are occupied?
>
>Regards,
>
>John Pitman
>
>-----Original Message-----
>From: Gilles Schipper [mailto:[log in to unmask]]
>Sent: Friday, 29 January 2010 1:38 PM
>To: John Pitman
>Subject: Re: [HP3000-L] dat72 autoloader
>
>John,
>
>Yes. That was how I was expecting this unit to work.
>
>Alas, no matter what devctrl commands I throw at it, it simply will
>not load tapes unless I physically push a few buttons.
>
>Oh well.
>
>Cheers,
>
>Gilles
>
>
>At 05:58 PM 2010-01-28, you wrote:
> >Giles,
> >Once we have loaded the first tape, we don't touch the drive until
> >we need to unload a tape from it. From then on its an autoloader -
> >we fill it for long weekends, Easter etc and away we go. The
> >obvious advantage is unattended scheduled backups all work, and if a
> >tape is faulty, its unloaded and backup moves on to next tape, and
> >doesn't get hung for lack of a tape.
> >
> >Regards,
> >
> >John Pitman
> >
> >-----Original Message-----
> >From: Gilles Schipper [mailto:[log in to unmask]]
> >Sent: Friday, 29 January 2010 9:26 AM
> >To: John Pitman; [log in to unmask]
> >Subject: Re: [HP3000-L] dat72 autoloader
> >
> >I've tried that, but unable to coax the drive to go online.
> >
> >The only way I can put the drive online is by pressing various
> >buttons on the front panel of the unit.
> >
> >Kinda makes the "autoloader" part of this unit pretty useless.
> >
> >I'm thinking there must be a dip switch setting that needs to be changed.
> >
> >
> >At 05:05 PM 2010-01-28, John Pitman wrote:
> > >No experience of that make/model, but -
> > >
> > >We have a HP dat 40x6 autoloader (8 tape magazine), and its
> > >configured like this in sysgen:-
> > >LDEV: 777 DEVNAME: OUTDEV: 0 MODE: R
> > > ID:
> DDSAUTO RSIZE: 128 DEVTYPE: TAPE
> > > PATH:
> 0/0/1/0.5.0 MPETYPE: 24 MPESUBTYPE: 7
> > >CLASS: TAPE
> > >
> > >AND we do this in sysstart:-
> > >
> > >devctrl 777,enable,enable
> > >
> > >The parms available are compress, eject, and load - we have not
> > >specified load in the above - check help devctrl for options.
> > >It always loads next tape on end of a backup, EVEN though SHOWDEV
> > >does not show a tape at ready - maybe because we are not setting
> > >Load to online? Its showing two leds (ready) now after last nights
> > >backup , but showdev gives AVAIL.
> > >
> > >If a tape gives an error I think it moves on to the next one. In
> > >this mode (eject=enable), I cant get my programmatic bring on
> line to work.
> > >
> > >We also have a dds 3 single drive on the traditional ldev 7. We set
> > >this to Eject= disable, as this allows for doing a store, and
> > >programmatically putting the tape back on line remotely - avoids
> > >having to be on site to do backup & restore.
> > >
> > >
> > >Regards,
> > >
> > >John Pitman
> > >-----Original Message-----
> > >From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> > >Behalf Of Gilles Schipper
> > >Sent: Friday, 29 January 2010 8:35 AM
> > >To: [log in to unmask]
> > >Subject: [HP3000-L] dat72 autoloader
> > >
> > >I have a Certance DAT72 autoloader, model no. CDL 432 configured on
> > >an HP3000 and have no problems reading from and writing to the unit.
> > >
> > >What I am having difficulty with is trying to automatically load the
> > >next tape from the 6-slot magazine.
> > >
> > >Trying the DEVCTRL.MPEXL.TELESUP command with varying parameter
> > >values has not been fruitful. (Specifically, DEVCTRL.MPEXL.TELESUP 8
> > >EJECT=ENABLE LOAD=ONLINE)
> > >
> > >Also, looking at the dip switches available do not appear to offer
> > >any obvious solutions there (I don't see a switch associated with the
> > >stacker or random mode operation).
> > >
> > >Does anyone have any experience with this model of autoloader or any
> > >suggestions as to how I can configure it so I can issue a command to
> > >load the next tape in the magazine ?
> > >
> > >Thanks.
> > >
> > >
> > >
> > >
> > >-------------------------------------------------------------------
> > ------------------------------
> > >Gilles Schipper
> > >GSA Inc.
> > >HP System Administration Specialists
> > >300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> > >Voice: 416.702.7900 Fax: 905.889.3001
> > >email: [log in to unmask] web: http://www.gsainc.com
> > >-------------------------------------------------------------------
> > ------------------------------
> > >
> > >* To join/leave the list, search archives, change list settings, *
> > >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> > >
> > >CAUTION: This message may contain privileged and confidential
> > >information intended only for the use of the addressee named above.
> > >If you are not the intended recipient of this message you are hereby
> > >notified that any use, dissemination, distribution or reproduction
> > >of this message is prohibited. If you have received this message in
> > >error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
> > >expressed in this message are those of the individual sender and may
> > >not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
> > >
> > >* To join/leave the list, search archives, change list settings, *
> > >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> >-------------------------------------------------------------------
> ------------------------------
> >Gilles Schipper
> >GSA Inc.
> >HP System Administration Specialists
> >300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
> >Voice: 416.702.7900 Fax: 905.889.3001
> >email: [log in to unmask] web: http://www.gsainc.com
> >-------------------------------------------------------------------
> ------------------------------
> >
> >
> >
> >CAUTION: This message may contain privileged and confidential
> >information intended only for the use of the addressee named above.
> >If you are not the intended recipient of this message you are hereby
> >notified that any use, dissemination, distribution or reproduction
> >of this message is prohibited. If you have received this message in
> >error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
> >expressed in this message are those of the individual sender and may
> >not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
> >
> >* To join/leave the list, search archives, change list settings, *
> >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>-------------------------------------------------------------------------------------------------
>Gilles Schipper
>GSA Inc.
>HP System Administration Specialists
>300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
>Voice: 416.702.7900 Fax: 905.889.3001
>email: [log in to unmask] web: http://www.gsainc.com
>-------------------------------------------------------------------------------------------------
>
>
>
>CAUTION: This message may contain privileged and confidential
>information intended only for the use of the addressee named above.
>If you are not the intended recipient of this message you are hereby
>notified that any use, dissemination, distribution or reproduction
>of this message is prohibited. If you have received this message in
>error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views
>expressed in this message are those of the individual sender and may
>not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 416.702.7900 Fax: 905.889.3001
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
CAUTION: This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, dissemination, distribution or reproduction of this message is prohibited. If you have received this message in error please notify RYCO Hydraulics Pty. Ltd. immediately. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of RYCO Hydraulics Pty. Ltd.
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
