HP3000-L Archives

August 2009, Week 1

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: web console on 959?
From:
Craig Lalley <[log in to unmask]>
Reply To:
Craig Lalley <[log in to unmask]>
Date:
Mon, 3 Aug 2009 23:55:57 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines) 
Just use the 25pin connector that is currently connected to the system console.

-Craig


--- On Tue, 8/4/09, John Pitman <[log in to unmask]> wrote:

> From: John Pitman <[log in to unmask]>
> Subject: Re: web console on 959?
> To: [log in to unmask]
> Date: Tuesday, August 4, 2009, 1:46 AM
> Do I need a straight thru 25->25
> cable? Or a 2-3 turnover ?
> 
> Regards,
> 
> John Pitman
> 
> -----Original Message-----
> From: Mark Ranft [mailto:[log in to unmask]]
> Sent: Tuesday, 4 August 2009 4:16 PM
> To: John Pitman; [log in to unmask]
> Subject: RE: [HP3000-L] web console on 959?
> 
> John Pitman asks...
> Anybody know if it will work please? The 959 has a DB25
> remote console
> socket, rather than the 9 pin of the N series, but....?
> 
> Mark R says...
> With the correct cable the web console should definitely
> work on the 959.  I
> had it working on a 989.  I am not sure why you would
> compare the 959 to the
> N-Class.  Anyone using web console on the N-Class
> should switch to using the
> GSP console.
> 
> For a better, more reliable, faster, more fully featured
> console on pre-GSP
> systems, I have set up remote console via DTC, using
> back-to-back DTC
> switching.  It is very nice.
> 
> Mark Ranft
> Pro 3K
> 
> 
> CAUTION: This message may contain privileged and
> confidential information intended only for the use of the
> addressee named above. If you are not the intended recipient
> of this message you are hereby notified that any use,
> dissemination, distribution or reproduction of this message
> is prohibited. If you have received this message in error
> please notify RYCO Hydraulics Pty. Ltd. immediately. Any
> views expressed in this message are those of the individual
> sender and may not necessarily reflect the views of RYCO
> Hydraulics Pty. Ltd.
> 
> * To join/leave the list, search archives, change list
> settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> 

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2