Hi Jim,
 Try using Mozilla/Firefox to access the SWC.
Your symptoms often relate to the browser. The SWC code will
never be updated to support all browsers.

Bob J. -- Ideal Computer Services
Hardware Support, Software Support
Disaster Recovery, Hosting
http://www.icsgroup.net (410)574-4911


Jim Alexander wrote:

>I have a Secure Web Console that worked fine on our original network.
>
>As you may or may not know, Longs Drugs was purchased by CVS.   We are
>now switching over to the CVS network.
>When connected to the CVS switch, I can get the Secure Web Console to
>respond and give me the logon screen. I enter the user name and password
>but all I get is the small box that says (I believe) "Logon in prgress"
>and it never comes back and does not seem to even error out.
>
>Yes, I have reconfigured the IP properly or it would not respond with
>the first page.  Since this I could not find success, I put the web
>console back on the Longs switch (after reconfiguring it again) and it
>works fine again.
>
>While there is a firewall out there on the CVS network, the PC I am
>going from and the Web Console are connected to the same switch and are
>not passing through the firewall.
>
>In addition, CVS has configured the ports 80 and 443 as these are the
>ports I could identify that the web console are using.
>
>Does anybody know more ports that should be open (although this should
>not be the problem)?
>
>Thanks in advance for any advice you can give.
>
>
>--
>Jim Alexander   Longs Drug Stores
>Sr. Systems Programmer  925-210-6901
>The opinions expressed are Mine and not Longs Drugs
>
>
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
>Behalf Of David N Lukenbill
>Sent: Friday, May 29, 2009 7:26 AM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] Install and reload on A500
>
>Hans,
>
>If you're using HP TurboStore, add the files STORXL51.PUB.SYS and
>STORXL52.PUB.SYS to the CSLT you're using for the reload.  (I like to
>add
>EDITOR.PUB.SYS also.)
>
>I like to have output from SYSINFO.PRVXL.TELESUP available.
>
>David N. Lukenbill
>HP-3000 System Administrator
>CSC
>
>This is a PRIVATE message. If you are not the intended recipient, please
>delete without copying and kindly advise us by e-mail of the mistake in
>delivery.
>NOTE: Regardless of content, this e-mail shall not operate to bind CSC
>to
>any order or other contract unless pursuant to explicit written
>agreement
>or government initiative expressly permitting the use of e-mail for such
>purpose.
>
>HP-3000 Systems Discussion <[log in to unmask]> wrote on 2009/05/29
>09:27:20 AM:
>
>  
>
>>After a planned diskchange on Tuesday, I'm going to do an install and
>>    
>>
>a
>  
>
>>reload on an A500 running MPE/iX 7.5
>>
>>While I'm mostly accustomed to performing this and many other tasks on
>>9x9s with MPE/iX 6.5, I would like to learn of any differences, hints,
>>pitfalls, ideas that you may want to share, with respect to the A500
>>platform.
>>/Hans
>>
>>    
>>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>  
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *