HP3000-L Archives

May 2009, Week 5

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Jim Alexander <[log in to unmask]>
Reply To:
Jim Alexander <[log in to unmask]>
Date:
Fri, 29 May 2009 07:34:18 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (84 lines)
I have a Secure Web Console that worked fine on our original network.

As you may or may not know, Longs Drugs was purchased by CVS.   We are
now switching over to the CVS network.
When connected to the CVS switch, I can get the Secure Web Console to
respond and give me the logon screen. I enter the user name and password
but all I get is the small box that says (I believe) "Logon in prgress"
and it never comes back and does not seem to even error out.

Yes, I have reconfigured the IP properly or it would not respond with
the first page.  Since this I could not find success, I put the web
console back on the Longs switch (after reconfiguring it again) and it
works fine again.

While there is a firewall out there on the CVS network, the PC I am
going from and the Web Console are connected to the same switch and are
not passing through the firewall.

In addition, CVS has configured the ports 80 and 443 as these are the
ports I could identify that the web console are using.

Does anybody know more ports that should be open (although this should
not be the problem)?

Thanks in advance for any advice you can give.


--
Jim Alexander   Longs Drug Stores
Sr. Systems Programmer  925-210-6901
The opinions expressed are Mine and not Longs Drugs



-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of David N Lukenbill
Sent: Friday, May 29, 2009 7:26 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] Install and reload on A500

Hans,

If you're using HP TurboStore, add the files STORXL51.PUB.SYS and
STORXL52.PUB.SYS to the CSLT you're using for the reload.  (I like to
add
EDITOR.PUB.SYS also.)

I like to have output from SYSINFO.PRVXL.TELESUP available.

David N. Lukenbill
HP-3000 System Administrator
CSC

This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery.
NOTE: Regardless of content, this e-mail shall not operate to bind CSC
to
any order or other contract unless pursuant to explicit written
agreement
or government initiative expressly permitting the use of e-mail for such
purpose.

HP-3000 Systems Discussion <[log in to unmask]> wrote on 2009/05/29
09:27:20 AM:

> After a planned diskchange on Tuesday, I'm going to do an install and
a
> reload on an A500 running MPE/iX 7.5
>
> While I'm mostly accustomed to performing this and many other tasks on
> 9x9s with MPE/iX 6.5, I would like to learn of any differences, hints,
> pitfalls, ideas that you may want to share, with respect to the A500
> platform.
> /Hans
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

ATOM RSS1 RSS2