Craig, nice Idea... but it did not work. I am still trying but running out
of time for the day...

Thanks to all who made suggestions...

On the sad note of the passing of Wirt, I will miss his presents...


ALWAYS...

Joe

On Fri, Feb 6, 2009 at 2:00 PM, Craig Lalley <[log in to unmask]> wrote:

> Joe,
>
> I am assuming this in not an N-class or A-class.  (If it is an A-class or
> N-class, you will need to reset the GSP)
>
> If you do a showdev 20? what do you get?
>
> I would try abortio 20, 3 or 4 times till you get no I/O to abort.
>
> Another trick was to use fcopy...
>
> FILE OUT;DEV=20
> FCOPY FROM=;TO=*OUT
> wakeup
> <control-y> to exit
>
> -Craig
>
>
> --- On Fri, 2/6/09, joseph dolliver <[log in to unmask]> wrote:
>
> > From: joseph dolliver <[log in to unmask]>
> > Subject: Hung console
> > To: [log in to unmask]
> > Date: Friday, February 6, 2009, 12:06 PM
> > We have an issue with the system console.. I had logged the
> > console off from
> > a remote desk and then performed a startsess 20
> > manager.sys;nowait. I do
> > this all the time... Anyway I ran a pscreen at the console
> > and it hung
> > somewhere in the middle of the scrool and now the console
> > does not respond.
> > If I hit the break key I get a ":" and cannot
> > type. I aborted the session
> > which registered at the console and I powered off and still
> > the same
> > results.
> >
> > I cannot do a crtl A or ctrl B either.. Replaced the
> > keyboard, then terminal
> > from known working terminals...
> >
> > Any I deas before I shutdown to try to clear it?
> >
> > Thanks in advance...
> >
>  > * To join/leave the list, search archives, change list
> > settings, *
> > * etc., please visit
> > http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *