The printers are fixed 10/half. The card is fixed 100/full.
Steve
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of John Pitman
Sent: Monday, October 20, 2008 1:57 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] Slow printing
Mixtures of auto sense and fixed speeds are not good things .....check the settings on the printers and the switch ports...
jp
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Davidek, Steve
Sent: Tuesday, 21 October 2008 3:41 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] Slow printing
Here is the screen shot of my linkcontrol. Anyone see anything I've missed? What is happening is that for example, while printing paychecks, about 20 print, pause for 2 minutes or so and print more. Reports sometimes are fast. Mostly print, pause, print...
Steve
9:41 AM <PUB.SYS>: linkcontrol @,a
Linkname: DTSLINK Linktype: HP-PB IEEE8023 Linkstate: CONNECTED
Physical Path: 10/4/0
Current Station Address: 08-00-09-7B-4E-BB
Default Station Address: 08-00-09-7B-4E-BB
Current Receive Filter: broad(1) any(0) k_pckts(1) x_pckts(0)
Current Multicast Addresses:
09-00-09-00-00-01 09-00-09-00-00-03 09-00-09-00-00-04
09-00-09-00-00-06
Transmits no error 0 Receives no error 0
Transmit byte count 0 Receive byte count 0
Transmits error 0 Receives error 0
Transmits deferred 0 Carrier losses 0
Transmits 1 retry 0 CRC errors 0
Transmits >1 retry 0 Frame losses 0
Trans 16 collisions 0 Whole byte errors 0
Trans late collision 0 Size range errors 0
802 chip restarts 0 Receives dropped 0
Heartbeat losses 0 Receives broadcast 0
Receives multicast 0
Linkname: LANLINK Linktype: HP-PB 100BT Linkstate: CONNECTED
Physical Path: 10/4/4
Current Station Address: 08-00-09-DA-00-72
Default Station Address: 08-00-09-DA-00-72
Current Multicast Addresses:
09-00-09-00-00-01
Transmit bytes 276074 Receive bytes 2349353
Transmits 1465 Receives 805
Transmits no error 1465 Receives broadcast 28045
Transmits dropped 0 Receives multicast 9
Transmits deferred 0 Receives no error 30273
Transmits 1 retry 0 CRC or Maxsize error 0
Transmits >1 retry 0 Code or Align error 0
Trans 16 collisions 0 Recv dropped: addr 1385
Trans late collision 0 Recv dropped: buffer 0
Trans underruns 0 Recv dropped: dma 0
Carrier losses 0 Recv dropped: other 29
Link disconnects 0 Recv deferred 0
Link speed 100 Recv overruns 0
Link duplex Full Link auto sensed No
Link mode 100Base-TX Secs since clear 1717
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Craig Lalley
Sent: Monday, October 20, 2008 9:06 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] Slow printing
Steve,
In order to 'see' how the HP3000 is set,
:LINKCONTROL @,a
-Craig
--- On Mon, 10/20/08, Mark Ranft <[log in to unmask]> wrote:
From: Mark Ranft <[log in to unmask]>
Subject: Re: Slow printing
To: [log in to unmask]
Date: Monday, October 20, 2008, 8:59 AM
Steve,
I know you meantioned that the switch was set to be forced full
duplex and 100Mb/sec, but is the HP3000 set that way in NMMGR LINK
configuration?
Mark Ranft
(612) 804-2774
[log in to unmask]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
