I don't have Reflection 7, my version is a lot newer, but I think the
settings are similar.

Find your way to the advanced HP options or connection option.

You should have the Host Prompt set to DC1.  Enq/Ack should be enabled, as
well as Host Prompt.  Check the Block transfer unit, mine is set to line.
Check to see if there is a button that will bring back the default settings.
Return definition should be CR.

Hope this helps.  Good night.

Denys...
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of John Pitman
Sent: Monday, September 08, 2008 10:16 PM
To: [log in to unmask]
Subject: [HP3000-L] REFLECTION PROBLEM WITH ACK?

Need help again please.

We have one, only one remote terminal (PC with reflections 7,l Win XP Pro SP
2) with a problem. Reflections has been uninstalled, re-installed.
First showed in Block line mode, as not completing reads correctly - not
getting the data it should, and thereby misbehaving. Now in  just mpe, it
takes 2 CR to get proper response. If no data is keyed and CR, we get a cr,
lf, but no : or D1 . Keying 1 char produces the : and the chr keyed.

Looks a bit like looking for enq-ack type issue, but behaviour is same with
enq-ack disabled.

ctrl-F  gives enough to complete the display
Anybody have any suggestions please?

tia
jp

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.169 / Virus Database: 270.6.19/1660 - Release Date: 9/8/2008
6:39 PM

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *