Subject: | |
From: | |
Reply To: | James B. Byrne |
Date: | Sun, 3 Aug 2008 12:12:24 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Gentle readers,
Several years ago I set up a spare HP3000-918LX as a semi-hot site for our
main processor, also an HP3000-918LX. As much as possible these machines
are identically configured. Recently I brought this machine back in house
to reconfigure it so as to place its nic on a private RFC1918 address
behind a dual homed Linux box acting as a router and as an SSHD client for
access to this box.
The problem that developed this morning has me perplexed. I was logged on
to the HP3000 via the console and ran quad. The console then stopped
accepting input and would not respond to the break request, or to <ctrl> A
(I did not try }<ctrl> B). However, tape mount messages still displayed.
As this box was not in production and I really did not want to spend all
day trying to figure out what was wrong between quad and the console I
rebooted the HP via the power switch.
Now the system will not boot! This is what I see:
------- Main Menu
-------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command or menu > sea
Searching for potential boot device.
This may take several minutes.
To discontinue, press any key.
Path Number Device Path Device Type
----------- ----------- -----------
P0 56/52.0 (dec) Seq. record access media
P1 56/52.4 (dec) Random access media
P2 56/52.5 (dec) Random access media
Main Menu: Enter command or menu > bo p1
Interact with IPL (Y or N)?> y
Booting...
Boot IO Dependent Code (IODC) revision 4
IPL error: bad LIF magic.
------- Main Menu
-------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command or menu >
Can someone enlighten me as to what has happened or what step my faulty
memory has caused me to skip?
--
*** E-Mail is NOT a SECURE channel ***
James B. Byrne mailto:[log in to unmask]
Harte & Lyne Limited http://www.harte-lyne.ca
9 Brockley Drive vox: +1 905 561 1241
Hamilton, Ontario fax: +1 905 561 0757
Canada L8E 3C3
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
|
|