John,
I often just use the HP3000 console when working on them...but here's
from the 7100 manual...
NOTE: Use the following settings in
HyperTerminal, COM1 (or COM2)
Properties, Port Settings:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Jack Connor
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of John MacLerran
Sent: Thursday, July 03, 2008 11:38 AM
To: [log in to unmask]
Subject: [HP3000-L] VA7100 Serial Port Config Values
Hi List,
We had to move the terminal that we have connected to our VA7100 array.
When the terminal was turned off and unplugged, it lost its serial
configs. Can anyone tell me what those configs should be (baud rate,
parity, terminal type, etc.)?
Thanks!
john maclerran
[log in to unmask]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|