You're getting closer.
The profile associated with ldev 900, PRNETPR will contain the class
name(s) for that device.
Simply modify the PRNETPR profile and remove the DISTSERV from it.
Or, if you're not using pseudo-ldev 900 any longer, remove ldev 900
by placing a "0" where the 900 now appears.
Don't forget to re-validate DTS subsstem.
When asked, answer "yes" to dynamic changes otherwise you will need
to "start norecovery" to effect changes and be able to utilize the
DISTSERV class name with a different ldev.
At 03:06 PM 2007-10-30, Tracy Pierce wrote:
>now we're on the right track I think...
>nmmgr
>f1 = Open Config,
>F1 = DTS,
>F1 = Go To DTC,
>F1 = List DTCs; only one on list = DTC01. F8 = Prior Screen.
>F2=16ix_nope;F3=16MX/RX_nope;F4=DTC16_nope;F5=DTC48_there it is!
>F1 = ReadDTC,
>NMMGR/3000 (B.06.00) #175 DTC48 Configuration
>Data: Y
>Fill in the required information; then press the Save Data key.
>
>Command:
>
>
>To see another DTC, enter the name then press Read DTC:
>
> DTC name: [DTC01 ] DTC LAN station address: [08-00-09-18-E9-8F]
>(in hex)
>
> DTC node name: [DTC01.GATE.COM ]
> (node.domain.organization)
> DTC IP Address: [ ] (optional) Enable logging class:
>(Y/N)
> 1 Y 2 [Y] 3 [Y]
> Enter card types as installed in DTC: 4 [N] 5 [N] 6 [N]
>
> Card # Type
>
> 0 [M] (D = Direct connect
> 1 [ ] M = Modem)
> 2 [ ]
> 3 [ ]
> 4 [ ]
> 5 [M]
>
>
>To configure a card, enter a card number then press Config Card. [0]
>
>File: NMCONFIG.PUB.SYS
>
>F4=Config Card. Nothing on card 0; card 5 shows port 0 ldev 900 profile
>PRNETPR.
>
>hmmm, maybe not quite the right track.
>all but ldev 23 in the npconfig.pub.sys list below work per these specs,
>via IP addresses. ldev 23 exists, is spooled, DISTSERV exists only in
>ioconfig. Need to equate DISTSERV to ldev 23 to complete the loop,
>can't figure out where to do that.
>
>thought I had this down but it's been a while.
>
> > -----Original Message-----
> > From: [log in to unmask] [mailto:[log in to unmask]]
> > Sent: Tuesday, October 30, 2007 11:39 AM
> > To: Tracy Pierce
> > Subject: Re: [HP3000-L] network printing
> >
> > One last thing, you create a dummy DTC in mnngr and add the
> > devclasses there
> >
> > From: Tracy Pierce <[log in to unmask]>
> > Date: 2007/10/30 Tue PM 01:03:58 CDT
> > To: [log in to unmask]
> > Subject: [HP3000-L] network printing
> >
> > can't remember how to do this! ioconfig listclass leads me to think I
> > had devclass DISTSERV pointing to ldev 900 (once used by MS
> > NetPrint); I
> > want to make that devclass work as ldev 23. but DISTSERV seems to be
> > lost...
> > IOCONFIG A.00.00 (catalog A.00.00) (c) 1994 Hewlett-Packard Co. All
> > Rights Reser
> > ved. TUE, OCT 30, 2007, 10:48 AM
> >
> > **note** Retrieving NMMGR configuration data...
> > ioconfig:listclass
> > CLASSNAME MODE LDEV(S)
> > --------- ---- -------
> > DLT ncio 12
> > TAPE ncio 8, 7, 9
> > DAT9 ncio 9
> > DISC random 5, 3, 2, 1
> > SPOOL random 5, 3, 2, 1
> > JOBTAPE ncio 10
> > CONSOLE cio 20
> > TERM cio 21
> > LP out 11
> > HP5SIMX out 13, 900
> > <some snippage>
> > SRTRAIN out 22, 900
> > BUSPARTS out 24, 900
> > ....
> > DISTSERV out 900
> > HR4050T out 900
> > SRSCHLJ5 out 900
> > ioconfig:MCLASS DISTSERV ALDEV 23
> > Class DISTSERV is not configured in the system currently.
> > (IOCONFIG 25)
> > ioconfig:exit
> > (HOBBES/SYS/PUB)/SHOWDEV DISTSERV
> > Logical device class "!" cannot be found on the system. (CIERR 1583)
> >
> > How please do I create the devclass and point it at ldev 23? The
> > npconfig line's already in place:
> >
> > 23 (network_address=10.10.3.142) # DISTSERV SF District Services
> > was PQ-DISTSERV-HP4050TN
> >
> >
> > Tracy Pierce
> > chair-keyboard ram failure?
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> >
> > joseph dolliver
> > e3k solutions , inc
> > 41630 marie court
> > leonardtown, md 20650
> >
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.503 / Virus Database: 269.15.12/1098 - Release Date:
>2007-10-29 9:28 AM
-------------------------------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
email: [log in to unmask] web: http://www.gsainc.com
-------------------------------------------------------------------------------------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
