Kim,

If your mirroring was setup correctly this set of drives should be on a
separate IO channel and also ideally in a separate enclosure.

Here is a list of things to check.
1) Bad power supply in the drive enclosure.
2) Bad cable/terminator.
3) Bad scsi card.
4) Bad HD, sometimes a bad drive can affect the function of all drives on
the channel.
5) Try a showset <vsname> dstatus in volutil. This may show something different.
6) Get a backup ASAP, obviously.
7) Try a reboot and power down the system and all attached devices for good
measure. Reseting everything may clear up the problem.

Good Luck,
Joshua Johnson
HP3000 Consultant

###################


On Wed, 10 Oct 2007 08:48:21 -0500, Kim Borgman <[log in to unmask]> wrote:

>"BUSY" will not let me resync them in volutil.
>I have answered the reply's on the console.
>
>Any ideas ?
>
>:DSTAT ALL
> LDEV-TYPE            STATUS    VOLUME           VOLUME SET - GEN
> ----------           -------   ----------------------------------
>    1-ST318404LC      MASTER    MEMBER1          MPEXL_SYSTEM_VOLUME_SET-0
>    2-ST318404LC      MEMBER    MEMBER2          MPEXL_SYSTEM_VOLUME_SET-0
>   25-ST318406LC      MASTER-MD MEMBER1          USER_VOLUME_SET-0
>   26-ST318406LC      MEMBER-MD MEMBER2          USER_VOLUME_SET-0
>   29-ST318406LC      MEMBER-MD MEMBER3          USER_VOLUME_SET-0
>   30-ST318406LC      MEMBER-MD MEMBER4          USER_VOLUME_SET-0
>   45-        BUSY *DISABLED-MD MEMBER1          USER_VOLUME_SET-0
>   46-        BUSY *DISABLED-MD MEMBER2          USER_VOLUME_SET-0
>   49-        BUSY *DISABLED-MD MEMBER3          USER_VOLUME_SET-0
>   50-ST318406LC   *DISABLED-MD MEMBER4          USER_VOLUME_SET-0
>
>Mr. Kim Borgman
>NWS Inc.
>Indianapolis, IN
>
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *