Thanks to all who responded........

I set the NMMGR settings to turn off auto-negotiate and turn on full duplex.

When I do a Linkcontrol @,A it shows that it perceives Full Duplex:

PUB.SYS:LINKCONTROL @,A
Linkname: DTSLINK   Linktype: PCI 100BT        Linkstate: CONNECTED
Physical Path:              0/0/0/0
Current Station Address:    00-30-6E-26-61-F2
Default Station Address:    00-30-6E-26-61-F2
Current Multicast Addresses:
09-00-09-00-00-01  09-00-09-00-00-03  09-00-09-00-00-04
09-00-09-00-00-06

Transmit bytes                3500008    Receive bytes    2522956
Transmits                       11119    Receives unicast    7538
Transmits no error              11119    Receives broadcast    13843
Transmits dropped                   0    Receives multicast    0
Transmits deferred                  0    Receives no error    17547
Transmits 1 retry                   0    Recv CRC error    2
Transmits >1 retry                  0    Recv Maxsize error    0
Trans 16 collisions                 0    Recv dropped: addr    3821
Trans late collision                0    Recv dropped: buffer    13
Trans underruns                     0    Recv dropped: descr    0
Carrier losses                      0    Recv dropped: other    2
Trans jabber timeout                0    Recv watchdg timeout    0
Link disconnects                    3    Recv collisions    0
Link speed                        100    Recv overruns    0
Link duplex                      Full    Link auto sensed    No
Link mode             100Base-TX Core    Secs since clear    227369


So, that appears to be working correctly. The switch still thinks the
connection is Half, even with recycling the power and changing
ports on the switch. I'm not sure what the problem is...or if there
is a problem, but again, thank you all.
Tom
Victor S. Barnes Company

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *