same problem with the 'low cost' 1022
*****************************
Terry W. Simpkins
Director ISIT
Measurement Specialties
757-766-4278
[log in to unmask]
www.acsevents.org/bikeride
*****************************
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Robert Mills
Sent: Tuesday, January 30, 2007 9:17 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] NPCONFIG and LaserJet 2600n
I have just found out that the 2600n is what used to be called a GDI
printer. It only has 2 internal fonts, does not support PCL, and is
fully controlled by a driver program loaded on the host.
It is more likely that HELL will freeze over before you could get it to
work with the 3000 :(.
regards,
Robert W.Mills
Systems Development Manager
Pinnacle Arvato
(020) 8309 3604
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Wirt Atmar
Sent: 30 January 2007 12:39
To: [log in to unmask]
Subject: Re: [HP3000-L] NPCONFIG and LaserJet 2600n
Robert asks:
> We have just replaced our HP LaserJet 8000 with a Colour (UK spelling)
> LaserJet 2600n and 3000 has stopped printing to it. I have searched
> the HP3000-L archive and comp.sys.hp.mpe (on google groups) and have
> not found anything. Any help would be appreciated.
>
> The current entries in our NPCONFIG file that apply to this printer
are:
>
> global (message_interval = 60 # Repeat msgs every >= 60
secs.
> banner_header = FALSE # Don't need header pages.
> banner_trailer = FALSE # Don't need trailer pages.
> pjl_supported = TRUE # LaserJets are full PJL
devices.
> jam_recovery = TRUE) # Reprints jammed pages by
> itself.
>
> 2001 (network_address = nnn.nnn.nnn.nnn # Class = LJ001
> setup_file = A4LANDLP.LJENV.SYSTEMS) # A4 Line Printer.
>
> Console messages are:
>
> 10:49/1369/Output spooler, LDEV #2001: SNMP error SNMP_NoSuchName
> reported while retrieving printer status.
> Native Mode Spooler message 9656
>
> 10:49/1369/Output spooler, LDEV #2001: Cannot communicate with
> network printer.
> Check network xport config, NPCONFIG.PUB.SYS, xport and links started
> status, intermediate network, and printer status.
> Native Mode Spooler message 9662
I would take the error messages pretty much at their word. Does the
printer have a JetDirect card attached to it, either as an internal EIO
card or an external print server? If not, the HP3000 is not likely to be
able to communicate with the printer.
Wirt Atmar
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
