This is the result of those commands:
:nettool.net.sys;info="res;di;quit"
NETTOOL Version: B0600003
Enter HELP HELP for an explanation of the help facility.
Enter HELP OPERATION for guidance on NETTOOL use.
Commands can be abbreviated, HELP keywords cannot.
Menu-specific commands for the ROOT:
>>>res
>>>di
TUE, SEP 19, 2006, 6:37:41 PM
Item Subsystem Name G/N Description Used High Max
____________________________________________________________________
1 NS XPORT CP_POOL_ (G) Control Buf Pool 0 1 300 :)
2 NS XPORT 1536____ (G) Inbound Buf Pool 30 70 170 :)
3 NS XPORT LOOP____ (N) Outbnd Buf Pool 0 0 128 :)
4 NS XPORT LAN0____ (N) Outbnd Buf Pool 0 95 128 :)
5 NS XPORT UDP (G) GProt Msg Pool 50 N/A 512 :)
6 NS XPORT PXP (G) GProt Msg Pool 1 N/A 660 :)
7 NS XPORT PROBE (G) CM Prot Msg Pool 1 N/A 678 :)
8 NS XPORT IP_NI (G) IP-NI Msg Pool 50 N/A 2048 :)
9 NS XPORT IP_NI (G) IP-NI Msg Pool 87 N/A 2048 :)
10 NS XPORT (G) Node Name Cache 0 1 360 :)
>>>quit
:nettool.net.sys;info="status;tcp;tcpglobal @;quit"
NETTOOL Version: B0600003
Enter HELP HELP for an explanation of the help facility.
Enter HELP OPERATION for guidance on NETTOOL use.
Commands can be abbreviated, HELP keywords cannot.
Menu-specific commands for the ROOT:
>>>status
>>>tcp
>>>tcpglobal
Local IP Address : @
============================================================================
TCP GLOBAL Statistics
Current Time: TUE, SEP 19, 2006, 6:38:09 PM
============================================================================
TCP GLOBAL Statistics
Maximum number of connections allowed : 128
Maximum number of sockets allowed : 512
Number of connections currently open : 128
Maximum re-transmissions per packet : 4
Cumulative Statistics
---------------------
. Total active opens : 7891
. Total passive opens : 5852
. Total inbound segments : 22104220
. Total outbound sengments : 41779093
. Total re-transmitted segments : 4893
. Total number of RESETS sent : 5866
. Total connection failures : 1
>>>quit
:
Ok, so I can see that the max connections is maxed at 128. How do I
increase that, and what impact will it have on the rest of the system?
Thanks,
Gordon
----- Original Message -----
From: "James Hofmeister" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, September 19, 2006 4:37 PM
Subject: [HP3000-L] FTP Questions again
> Hello Gordon,
>
> nettool.net.sys;info="res;di;quit"
>
> check for unhappies.
>
> nettool.net.sys;info="status;tcp;tcpglobal @;quit"
> ...
> Maximum number of connections allowed : 4096
> ...
> Number of connections currently open : 10
> ...
> check for number connections open v.s. maxinum allowed. This should be checked while the problem is being seen with the mput.
>
> Regards,
> James Hofmeister
>
> -------------- Original message --------------
> From: Gordon Montgomery <[log in to unmask]>
>
> > OK, another FTP question. I have downloaded and installed
> > the latest FTP ( client and server I assume ) from HP onto
> > my HP969 ver 6.0 box. This is the header shown when I
> > start an FTP session on that box:
> >
> > File Transfer Protocol [A0009R13] (C) Hewlett-Packard Co. 2000 [PASSIVE SUPPORT]
> >
> > My problem is when I issue an mput command, it dies after a handful
> > of files. I can't pin down if it always dies after a certain number of
> > files, or a certain amount of data. I think it has to do with the number
> > of files though, because I can transfer one very large ( ~2 GB ) file
> > successfully. It takes 30 minutes, but it completes.
> >
> > This is to a Windows NT box. Now just to make sure, I tried the other
> > direction. This time from a Windows 2003 Server to the HP. I issued
> > an mget, and the same thing happens. This time on the 2003 client,
> > I see a '426 Host is down' error message. If I try any command such
> > as ls, I get '425 Host is down'. However, I can just leave the session
> > connected, but idle for 5 minutes or so and things start working again.
> >
> > For now, I am just trying to transfer files in smaller chunks manually,
> > but I wonder if there is a better work around for this problem. I may
> > have to do the same procedure a couple of times before I'm done and
> > I would like it to be as simple as possible.
> >
> > Thanks,
> >
> > Gordon Montgomery
> > Living Scriptures, Inc.
> > (801) 627-2000
> > [log in to unmask]
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
