Hi Nigel,
I had been working with Gilles Schipper behind the scenes :-)....Below is
the config, and Yes, it is a Pseudo Terminal setup....based on no other
changes needed for another couple of months, at which time this site is
going to be consolidated onto a different box at a central location, and the
desire not to have to do further reboots, I am not sure what else the site
will be willing to do, but you never know ;-)...
Dan
PATH: DTS.PROFILE.TR10U
Terminal type [10] (10, 18, or 24)
or terminal type file name [ ]
Line speed [19200] (300, 1200, 2400, 4800, 9600, 19200, or 38400
bps)
Record width [132 ] (1... 2048 bytes)
Modem type [1] (0 - none, 1 - US, 2 - EU, 3 - Five wires,
4 - US inout, 5 - EU inout)
Modem behavior [1] (0 - none, 1 - DCE, 2 - DTE, 3 - DCE high)
Data length/Parity [NONE] (None, Odd, Even, 0's, 1's, 8eve, 8odd)
Number of stop bits [1] (1/2) Speed/Parity sensing? [Y] (Y/N)
Hardware handshaking? [N] (Y/N) Allow :HELLO logon? [Y] (Y/N)
Enable flow control? [Y] (Y/N) NLIO device? [N] (Y/N)
Reset HP terminal? [N] (Y/N)
Device class [ ] [ ] [ ] [ ]
names [ ] [ ] [ ] [ ]
If additional names are required, press Go to CLASSES.
File: NMCONFIG.PUB.SYS
And you guessed correctly on the reboot option.....it IS an option, though
not a convenient one ;-)
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Skeet, Nigel
Sent: Monday, February 06, 2006 4:23 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem
Hi Dan,
What is LDEV 132 ? Is it some sort of DTC printer or Pseudo device ? If
a DTS device what profile is it using ?
Regards,
Nige...
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Dan Barnes
Sent: 03 February 2006 16:43
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem
Hmmm, even after a reboot, the site is still getting the following
message at startup:
print logdcc.pub.sys
========== FRI, FEB 3, 2006, 8:55 AM
DCC STARTUP - ENTER - version C0500001 compiled 000612
DCC ERROR -120-3, (HLIO status 0004006F, ldev 132). (DCCERR=6)
DCC STARTUP - ERROR
Any other ideas ?!?
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Dan Barnes
Sent: Friday, February 03, 2006 8:32 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem
Well, I was able to get the validate to go thru cleanly by not choosing
to apply the changes now, so managed to save my co-workers input work
from yesterday.
Now we are working on getting a reboot done to see if things will clear
up.....
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf Of Gilles Schipper
Sent: Thursday, February 02, 2006 5:18 PM
To: [log in to unmask]
Subject: Re: [HP3000-L] DTCCNTRL Problem
If that's the case, you need to back out the printer definition or fix
it such that validation succeeds.
You will not be able to successfully restart the DCC subsystem absent a
valid DTS subsystem subset of your nmconfig file.
You may be able to recover an earlier version NMCONFIX.PUB.SYS. Try
replacing NMCONFIG with that, revalidate and reboot.
If that does not do it, you will need to retrieve NMCONFIG.PUB.SYS from
backup, revalidate, and reboot.
At 06:11 PM 2006-02-02, Dan Barnes wrote:
>Another one of our admins had gone into nmmgr to add a printer
definition.
>When she went to Validate this, the error was initially encountered.
>Subsequent attempts to try to get it to either restart, or shutdown,
and
>then restart have all failed with the described message.
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
Behalf
>Of Catherine Litten
>Sent: Thursday, February 02, 2006 4:57 PM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] DTCCNTRL Problem
>
>What caused to to restart the DTC to begin with. If you had some sort
of
>system boggle or change then changed it again without a reboot in
between
>thats when I find I get these kind of messages.
>
>Hope this helps,
>Cat Litten
>x2911
>CONFIDENTIALITY NOTICE
>This transmission and any attachments are confidential and intended
solely
>for the use of the individual or entity to which they are addressed. It
may
>also be legally privileged and protected under any and all local, state
and
>federal laws. If you are not the addressee, you may not copy, forward,
>disclose or use any part of it. If you have received this message in
error,
>please delete it and all copies from your system and notify the sender
>immediately by return E-mail, fax or phone.
>Electronic communications cannot be guaranteed to be timely, secure,
error
>or virus-free. The sender does not accept liability for any errors or
>omissions or differences between the original and the transmission copy
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]]On
>Behalf Of Dan Barnes
>Sent: Thursday, February 02, 2006 2:15 PM
>To: [log in to unmask]
>Subject: DTCCNTRL Problem
>
>
>Hi Gang,
>
>I have tried the following, but still get the same error. Are there
any
>other options ?
>
>:DTCCNTRL FUNC=RESTART
>
>DTCCNTRL Version C.02.00.004 (C) Hewlett-Packard Co. 1990
>
>CTL ERROR: DCC encountered error during previous DTS startup.
>
>END OF PROGRAM
>
>Thanks!
>Dan
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>__________ NOD32 1.1391 (20060201) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.eset.com
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
------------------------------------------------------------------------
----
---------------------
Gilles Schipper
GSA Inc.
HP System Administration Specialists
300 John Street, Box 87651 Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000 Fax: 905.889.3001
email: [log in to unmask] web: http://www.gsainc.com
------------------------------------------------------------------------
----
---------------------
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________ NOD32 1.1391 (20060201) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________ NOD32 1.1392 (20060202) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
__________ NOD32 1.1394 (20060205) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
