James, I would love to help you, but I am totally confused now.  If you
could explain what you have now (and how it is setup), what you want to add
and what mapper showed, I could try to make some suggestions.

Denys

-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of James B. Byrne
Sent: Friday, August 05, 2005 9:44 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] OK Mapper does not see the drive, now what?

On 4 Aug 2005 at 21:58, Noel Magee wrote:

> Not sure if this is your situation AT ALL ... but, I had a Netserver
> around here for a good while w/Fast, Wide, SingleEnded (or were they
> just Wide, SingleEnded?) interfaces.  Came w/half height 4GB drives
> and I bought some half height 18GB drives for it.  This worked fine
> once I JUMPERED EACH DRIVE TO SingleEnded


The drive is an HP/ComPaq HB01831B95 18.2 GB Ultra 3 with no visible
jumpers.  The local tech says that the devices is inherently single-
ended as their is not pass-thru connector.  I am not sure that this
is the same thing as what is meant by SE for SCSI but I have no solid
reason to doubt this assertion.

Regards,
Jim


I am open to further suggestions.  As I am a digest subscriber I
really appreciate replies to the list directly copied to me as well.

Regards,
Jim


--

***     e-mail is NOT a secure channel     ***
James B. Byrne                mailto:ByrneJB.<token>@Harte-Lyne.ca
Harte & Lyne Limited          http://www.harte-lyne.ca
9 Brockley Drive              vox: +1 905 561 1241
Hamilton, Ontario             fax: +1 905 561 0757
Canada  L8E 3CE               delivery <token> = hal

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *