Yes......
-----Original Message-----
From: Andreas Schmidt [mailto:[log in to unmask]]
Sent: Monday, August 01, 2005 10:55 AM
To: Dan Barnes
Cc: [log in to unmask]
Subject: Re: [HP3000-L] DiskDump Problem
are all required groups there?
group HP36375.TELESUP needs to sit on DISKDUMP_VOLUME_SET, and also
DISKDUMP.TELESUP
both have PH capability
Best regards,
Andreas Schmidt
CSC Managed Services GmbH
Global Infrastructure Services, Global Processing Engineering Services
DuPont-Strasse 1, Room 1-346
D-61352 Bad Homburg
Germany
Phone: +49 (0) 6172 / 87-2117 Fax -2195 DUCOM x951-2117
eMail: [log in to unmask]
HP e3000 Intranet Information at http://web1.cscbhg.dupont.com/web/hp3000/
Unix Intranet Information at http://bhghpx12.bhg.dupont.com/
----------------------------------------------------------------------------
------------
This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose.
----------------------------------------------------------------------------
------------
|---------+--------------------------->
| | Dan Barnes |
| | <dan.barnes |
| | @lci-online.com>|
| | Sent by: HP-3000|
| | Systems |
| | Discussion |
| | <HP3000-L |
| | |
| | |
| | 08/01/2005 05:41|
| | PM |
| | Please respond |
| | to Dan Barnes |
| | |
|---------+--------------------------->
>---------------------------------------------------------------------------
-----------------------------------------------|
|
|
| To: [log in to unmask]
|
| cc:
|
| Subject: Re: [HP3000-L] DiskDump Problem
|
>---------------------------------------------------------------------------
-----------------------------------------------|
Yep....I have that. It had been setup before, and I was doing some cleanup
and wanted to rebuild the environment from scratch and ran into this
problem.
-----Original Message-----
From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf
Of Christian Lheureux
Sent: Monday, August 01, 2005 10:09 AM
To: [log in to unmask]
Subject: Re: [HP3000-L] DiskDump Problem
Er ... Don't you need AutoRestart/XL (HP36375A) for Dump-to-Disk to work ?
Or has Autorestart been made part of FOS ? Or am I confused ?
Christian Lheureux
Directeur BU Infrastructure / Manager of IT Infrastructure BU
________________________________
29, rue de Rosières
91240 SAINT-MICHEL-SUR-ORGE
FRANCE
Téléphone :
+33 1 69 72 12 83
Fax :
+33 1 60 15 30 62
Email :
[log in to unmask]
Web :
www.btwcomputing.com
________________________________
En mai 2004,APPIC RH devient BTW Computing, une activité du Groupe BTW
In May 2004, APPIC RH becomes BTW Computing, an activity of the BTW Group
> -----Message d'origine-----
> De : HP-3000 Systems Discussion [mailto:[log in to unmask]] De la
part
> de Dan Barnes
> Envoyé : lundi 1 août 2005 16:59
> À : [log in to unmask]
> Objet : [HP3000-L] DiskDump Problem
>
> Hi -L Gang,
>
> I have run into something I haven't seen before, and can find nothing in
> the arhives on. I am preping a crash&burn box for a backup system that
> will be making a physical relocation. The box needs to be setup to be
> alble to support the production environment if all goes totally south, so
> this includes setting up dump-to-disk for faster recovery.
>
> In preparing to seutp this diskdump environment, I have run into the
> following when running blddump:
>
> BLDDUMP/iX C.39.06 Copyright Hewlett-Packard Co. 1987. All rights
> reserved.
>
> No Dumpfile(s) are present.
> Future dumps will go to tape unless new dumpfile(s) are built.
> (#1) blddump > build dump1 3800 yes
> Internal error opening file for volume set verification.
> Error status = -542
> Subsystem = 143
> (#2) blddump >
>
> I have rebooted, have vsclosed, scratched, and re-defined the volume set
> within volutil, but all to no avail.
>
> Any ideas from this wise group ?!?
>
> TIA,
> Dan
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
