Thi:

Give a call to Speedware Tech Support.  Tech support is very good at
what they do.

That fact is the Speedware program aborted, and thus a Speedware problem.

Although I suspect that you are using arrays, and you may have
encountered a bounds violation.

Olav Kappert.

Thi Green wrote:

>Hi everyone,
>
>I would greatly appreciate any help on the following error.
>We are testing different menus in Speedware in MPE/iX on HP3000 when we get
>aborted with the message:
>"Illegal data address (traps 65).
>ABORT:SPW4GL.SPW7.SPEEDWRE
>NM PROG 77d.00309e2c _malloc+$194 "
>With a setdump, I get the following:
>ABORT: SPW4GL.SPW7.SPEEDWRE
>PC=3d3.00309e2c _malloc+$194
>NM* 0) SP=41855ef0 RP=3d3.00106584 ex_branch+$614
>NM 1) SP=41855e70 RP=3d3.00105ec4 ?ex_branch+$8
>export stub: 3d3.0011c824 ex_menu+$5e0
>NM 2) SP=41855cf0 RP=3d3.0011c148 ?ex_menu+$8
>export stub: 3d3.000bdb10 load_and_exec_segment+$ec
>NM 3) SP=41855c70 RP=3d3.000bd22c exec_compil+$80
>NM 4) SP=41855c30 RP=3d3.000791c8 loadpcode+$284
>NM 5) SP=41855bf0 RP=3d3.0005d644 compilation+$110
>NM 6) SP=41855b70 RP=3d3.0012fbbc ex_section+$50
>NM 7) SP=41855af0 RP=3d3.0012fb40 ?ex_section+$8
>export stub: 3d3.00106b14 branch_process+$260
>NM 8) SP=41855a70 RP=3d3.0011ceac ex_menu+$c68
>NM 9) SP=418559f0 RP=3d3.0011c148 ?ex_menu+$8
>export stub: 3d3.000bdb10 load_and_exec_segment+$ec
>NM a) SP=41855970 RP=3d3.000bd22c exec_compil+$80
>++ +| ++++|-||=-+ +++- -|++0791c8 loadpcode+$284NU--------------------------
>---
>NM c) SP=418558f0 RP=3d3.0005d644 compilation+$110
>NM d) SP=41855870 RP=3d3.0012fbbc ex_section+$50
>$5 ($aa) nmdebug > RP=3d3.000bd22c exec_compil+$80
>Unknown command. (error #10105)c8 loadpcode+$284
>$6 ($aa) nmdebug > RP=3d3.0005d644 compilation+$110
>NM 14) SP=41855570 RP=3d3.00055d08 call_start+$80
>NM 15) SP=418554f0 RP=3d3.00055bd4 main+$170
>NM 16) SP=418554b0 RP=3d3.0030d00c _start+$74
>NM 17) SP=41855330 RP=3d3.000559fc $START$+$1c
>NM 18) SP=418541b0 RP=3d3.00000000
>(end of NM stack)
>
>R0 =00000000 fffffff8 00000000 41679800 R4 =4165a000 20202020 00000028
>419d6570
>R8 =41668000 00000028 00000000 00000000 R12=00000000 00000000 00000000
>00000000
>R16=00000000 00000000 00000000 00000008 R20=00000020 419d4008 00000080
>00000009
>R24=41a81f70 00000008 00000020 41646000 R28=00000004 00000004 41855ef0
>419d6a88
>
>IPSW=0004000f=thlnxbCvmrQPDI PRIV=3
>SAR=10 PCQF=3d3.309e2f 3d3.309e33
>
>SR0=0000000a 000000d3 00000000 00000000 SR4=000003d3 000000ab 0000000b
>0000000a
>TR0=41858568 048d7448 00785460 418585b0 TR4=c0000000 00000000 41857eb0
>0013cbd8
>PID1=00000128=00000094(W) PID2=00000000=00000000(W)
>PID3=00000000=00000000(W) PID4=00000000=00000000(W)
>RCTR=00000000 ISR=000003d3 IOR=20202020 IIR=0ca01093 IVA=00151000
>ITMR=d3513479
>EIEM=ffffffff EIRR=00000000 CCR=c0
>EIEM=ffffffff EIRR=00000000 CCR=c0
>
>**** PROCESS ABORT INTERACTIVE DEBUG FACILITY ****
>
>We only have that error since 2 weeks after we install Samba on our test
>machine. There is not many users (3,4) on the test box and memory is 512M.
>Even accessing spooler in the Speedware menu can get the same error. This
>error is not constant, it happens sporadically, once or twice a week. I
>tend to think that it's not a Speedware error since it doesn't have the
>usual Speedware error box message. But if you have any idea what can cause
>this, please help. Thanks,
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *