as far as unplugging and plugging drives i have done it with no problem.
one issue will be drive addresses.
-------------------------------------------------
Larry Simonsen Phone: 801-437-3737
Flowserve Corporation Fax: 801-491-1750
505 E. Technology Ave http://www.Flowserve.com
Bldg. C, Suite 3100 e-mail: [log in to unmask]
Orem, UT 84097
-------------------------------------------------
All opinions expressed herein are my own and reflect, in no way, those of
my employer.
John MacLerran <[log in to unmask]>
Sent by: HP-3000 Systems Discussion <[log in to unmask]>
01/06/2005 09:03 AM
Please respond to
John MacLerran <[log in to unmask]>
To
[log in to unmask]
cc
Subject
Swap failed DDS4 drive
Dear HP3000-L
We have a DDS4 tape drive, housed in a 'Smart' enclosure, which has
apparently failed. It continually asks to be cleaned, even though we've
cleaned it several times. The failed drive is on our development box. On
our production box, we have two DDS4 drives in a similar smart enclosure,
one of which is not frequently used, so I have a 'spare' that I can use on
the development box.
My question: Can I move the spare drive from the production 3000 to the
development 3000 while both 3000s are up, or should I do a shutdown first?
Thanks!
John MacLerran
[log in to unmask]
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|
